Hirce J D, Sather A H, Chao E Y
Am J Orthod. 1980 Oct;78(4):444-52. doi: 10.1016/0002-9416(80)90025-1.
This study tests the hypothesis that the beneficial effects of topical fluoride can be realized without reducing the bond strength of the resin adhesive. Twenty-eight groups of four teeth (third molars and premolars) were extracted from twenty-eight patients and stored in distilled water. Twin brackets on Ormesh pads were bonded to all teeth with Endur adhesive. One tooth from each group was bonded according to the manufacturer's instructions. These teeth, Subgroup I, served as controls. Subgroup II teeth were etched for 4 minutes with 50% phosphoric acid containing 2 percent sodium fluoride. Subgroup III teeth received a 3-minute application of a basic phosphate fluoride solution (10(-2)M NA3PO4, 10(3) ppm F) after 1 minute of etching with 50 percent phosphoric acid. Subgroup IV teeth received a 4-minute application of 8 percent stannous fluoride solution after 1 minute of etching with 50 percent phosphoric acid. Each tooth was mounted in a block of improved dental stone; guide wires were used to reproduce bracket orientation. The M.T.S. materials-testing apparatus was used to generate a torsional moment on the bracket at a rate of 1 degree per second. Fluoride uptake by enamel has been shown to be greater in an acid medium or after acid etching. The application of directly bonded orthodontic brackets and pit-and-fissure sealants requires acid etching of the enamel surface. This study supports the use of topical fluoride after acid etching, a procedure that achieves the benefits of increased fluoride uptake without changing the bond strength of the resin adhesive.
