Tsibikov V B, Frosin V N, Serafimov A S, Mitianin A I
Med Tekh. 1982 Nov-Dec(6):42-6.
The investigation of the process proceeding in the chamber of an air sterilizer has shown that its design and testing should be performed with the loaded chamber. Petri dishes are advisable to be used as a loading simulator. Thermophysic parameters of sterilizers may be improved through the use of a blower with the blade angle of 40 degrees and the rate of 2400 revs/min.
对空气消毒器腔室内进行的过程研究表明，其设计和测试应在满载腔室的情况下进行。建议使用培养皿作为负载模拟器。通过使用叶片角度为40度、转速为2400转/分钟的鼓风机，可以改善消毒器的热物理参数。
