Söderström S, Brahme A
Department of Medical Radiation Physics, Karolinska Institutet, Stockholm, Sweden.
Int J Radiat Oncol Biol Phys. 1995 Aug 30;33(1):151-9. doi: 10.1016/0360-3016(95)00113-D.
Computer-controlled milling machines for compensator manufacture, dynamic multileaf collimators, and narrow scanned electron or bremsstrahlung photon beams have opened up new possibilities to shape nonuniform fluence profiles and have thus, paved the road for truly three dimensional (3D) dose delivery. The present paper investigates the number of beam portals required to optimize coplanar radiation therapy using uniform and nonuniform dose delivery.
A recently developed algorithm has been used for optimization of the dose delivery in such a way that the probability of achieving tumor control without causing severe reactions in healthy normal tissues becomes as high as possible. This method has been used to optimize the delivered dose distribution for an increasing number of beam portals to determine how many coplanar beam portals are desirable to safely achieve a good treatment outcome. Target volumes in the head and neck, thorax, and abdomen have been investigated.
Nonuniform dose delivery allows a considerable improvement in the treatment outcome compared to uniform dose delivery. This is evident both from the probability of achieving complication-free tumor control and the value of relevant properties of the dose distribution, such as the mean value and the standard deviation of the mean dose to target volume and organs at risk. The results also show a close relationship between the dose distribution parameters and the probability of achieving complication-free tumor control. The level of complication-free tumor control first increases rapidly when the number of beam portals is increased, but already reaches a level of saturation after three to five beam portals. When the saturation level has been reached, the standard deviation of the mean dose to the target volume is around 3%.
To achieve optimal expectation value of the treatment outcome, within an accuracy of a few percent as measured by the probability of achieving complication-free tumor control, it is generally sufficient to use three nonuniform beam portals. A very large number of coplanar beams may only raise the probability of achieving complication-free tumor control by 1 to 2%. However, good treatment outcome with three beam portals requires that the directions of incidence of the coplanar nonuniform beams are optimally selected. If, on the other hand, the treatment is performed using uniform beams, it is not possible, even with an infinite number of fields, to obtain as high a level of complication-free tumor control as with a few nonuniform beams. From an optimization point of view, it is sufficient to reach a relative standard deviation of the mean dose to the target volume of around 3%. Improved dose homogeneity beyond this level will, in general, not significantly improve the complication-free tumor control.
用于制造补偿器的计算机控制铣床、动态多叶准直器以及窄扫描电子束或韧致辐射光子束,为塑造非均匀注量分布开辟了新的可能性,从而为真正的三维(3D)剂量递送铺平了道路。本文研究了使用均匀和非均匀剂量递送优化共面放射治疗所需的射野数量。
一种最近开发的算法已被用于以这样一种方式优化剂量递送,即实现肿瘤控制而不引起健康正常组织严重反应的概率尽可能高。该方法已被用于针对越来越多的射野优化递送的剂量分布,以确定需要多少个共面射野才能安全地实现良好的治疗效果。对头颈部、胸部和腹部的靶区进行了研究。
与均匀剂量递送相比,非均匀剂量递送可使治疗效果有显著改善。这从实现无并发症肿瘤控制的概率以及剂量分布相关特性的值,如靶区和危及器官的平均剂量的平均值和标准差中都很明显。结果还表明剂量分布参数与实现无并发症肿瘤控制的概率之间存在密切关系。无并发症肿瘤控制水平在射野数量增加时首先迅速提高,但在三到五个射野后就已达到饱和水平。当达到饱和水平时,靶区平均剂量的标准差约为3%。
为了在以实现无并发症肿瘤控制的概率衡量的百分之几的精度内实现治疗效果的最佳期望值,通常使用三个非均匀射野就足够了。大量的共面射野可能只会使实现无并发症肿瘤控制的概率提高1%至2%。然而,使用三个射野获得良好的治疗效果需要最佳地选择共面非均匀射野的入射方向。另一方面,如果使用均匀射野进行治疗,即使有无限数量的射野,也不可能获得与少数非均匀射野一样高的无并发症肿瘤控制水平。从优化的角度来看,靶区平均剂量的相对标准差达到约3%就足够了。一般来说,超过这个水平改善剂量均匀性不会显著提高无并发症肿瘤控制率。