Kasales C J, Hopper K D, Ariola D N, TenHave T R, Meilstrup J W, Mahraj R P, Van Hook D, Westacott S, Sefczek R J, Barr J D
Department of Radiology, Pennsylvania State University, Hershey 17033, USA.
AJR Am J Roentgenol. 1995 May;164(5):1281-4. doi: 10.2214/ajr.164.5.7717248.
This in vitro study was designed to assess the z-axis resolving capabilities of reconstructed helical CT scans obtained with various imaging parameters versus those of conventional CT scans and the effect of decreasing slice index on the z-axis resolution of helical CT.
A z-axis line-pair phantom was imaged using conventional nonoverlapped CT scans, conventional CT scans that overlapped by 50%, and helical CT scans with pitches of 1.0 and 1.5. All helical images were reconstructed at comparable slice indexes (image indexes of 2.0, 1.0, and 0.5 mm for pitch = 1.0, and image indexes of 3.0, 1.5, and 0.75 mm for pitch = 1.5). Midline coronal and sagittal reconstructed images were obtained to allow standardized visualization of line pairs. The reconstructed images were reviewed separately by 10 radiologists.
The overall z-axis resolution of reconstructed helical CT scans equaled or exceeded that of nonoverlapped conventional CT scans in all cases and equaled that of 50% overlapped conventional CT scans in 75% of cases. The 1.0-pitch helical sequences showed improved z-axis resolution with decreasing slice index. No statistically significant improvement in z-axis resolution could be determined by the observers for 1.5-pitch sequences with decreasing slice index.
The use of helical CT with a pitch of 1.0 or 1.5 and an increased slice index can improve the z-axis resolution of reconstructed images when compared with nonoverlapped conventional CT and frequently equals the resolution of 50% overlapped conventional CT. This improvement in z-axis resolution should improve the appearance of reconstructed images (as used in CT angiography and three-dimensional imaging) by reducing partial volume artifacts while affording faster scanning at a reduced skin-surface radiation dose.
本体外研究旨在评估采用不同成像参数获得的重建螺旋CT扫描与传统CT扫描在z轴分辨率方面的差异,以及降低层厚指数对螺旋CT z轴分辨率的影响。
使用传统非重叠CT扫描、重叠50%的传统CT扫描以及螺距为1.0和1.5的螺旋CT扫描对z轴线对模型进行成像。所有螺旋图像均以可比的层厚指数进行重建(螺距 = 1.0时,图像层厚指数分别为2.0、1.0和0.5 mm;螺距 = 1.5时,图像层厚指数分别为3.0、1.5和0.75 mm)。获取中线冠状面和矢状面重建图像,以便对线对进行标准化观察。10名放射科医生分别对重建图像进行评估。
在所有情况下,重建螺旋CT扫描的总体z轴分辨率等于或超过非重叠传统CT扫描,75%的情况下等于50%重叠传统CT扫描。螺距为1.0的螺旋序列随着层厚指数降低,z轴分辨率有所提高。对于螺距为1.5的序列,随着层厚指数降低,观察者无法确定z轴分辨率有统计学意义的提高。
与非重叠传统CT相比,使用螺距为1.0或1.5且增加层厚指数的螺旋CT可提高重建图像的z轴分辨率,且常常等同于50%重叠传统CT的分辨率。z轴分辨率的这种提高应能改善重建图像(如在CT血管造影和三维成像中使用的图像)的外观,减少部分容积伪影,同时在降低皮肤表面辐射剂量的情况下实现更快的扫描。