Asbestos body formation in the human lung: distinctions, by type and size.

The fraction of fibers coated in a total of 3,800 asbestos fibers from 38 patients with disease related to asbestos (100 fibers per patient) was determined, according to asbestos fiber type and size parameters. Among the 3,800 fibers, 638 (16.8%) were coated and 3,162 were uncoated. All fibers were analyzed at 2,000 x magnification (lower limit of detection: 2 microns for length and 0.06 microns for diameter). The diameter of the totally coated fibers (28.4% of total bodies; 181/638) was not measured. The percentage of coated fibers varied with the asbestos type; it was 27.1% (335/1235) for amosite fibers, 16.0% (228/1423) for crocidolite, 6.6% (60/908) for tremolite or actinolite, 6.5% (14/214) for anthophyllite, and 5% (1/20) for chrysotile fibers. Most coated fibers were longer than 10 microns and had an aspect ratio (length/diameter) of more than 20. Approximately 60% of coated fibers had an aspect ratio of more than 100. The longer the fiber, the greater the percentage of coated fibers, regardless of diameter. The increase in the percentage associated with length was more marked in fibers with a smaller diameter; the percentage of coated fibers was, therefore, greater in fibers 30 microns or less in diameter. However, in fibers longer than 30 microns, the relationship to percentage of coated fibers was not as clear, and the diameter was less important. Accordingly, the fibers with high aspect ratios, particularly long fibers, tended to show asbestos body formation. The percentage of long fibers was highest in amosite, and the percentage of fibers with an aspect ratio of more than 100 was highest in amosite and crocidolite.(ABSTRACT TRUNCATED AT 250 WORDS)