Tanii H
Department of Hygiene, School of Medicine, Kanazawa University.
Sangyo Igaku. 1994 Sep;36(5):299-313. doi: 10.1539/joh1959.36.5_299.
The number of chemicals used in industry is increasing, and as a consequence workers in chemical industries are thought to have many opportunities for being exposed to chemicals. For organic solvents, although a number of studies have shown the toxicity of individual chemicals, there are a relatively small number of studies that have described their toxicity in terms of a quantitative structure-activity relationship (QSAR). In the present article I first introduced an outline of the method of QSAR (Hansch's method), and then reviewed the literature on QSAR of industrial chemicals, principally organic solvents and related chemicals as follows: 1) A review was made of the studies of general toxicity of chlorophenols, alcohols, amines, anilines, phenols, ethers, alkanes, ketones, acrylates, methacrylates and nitriles. In almost all cases, the general toxicity is related to log P, in which P is n-octanol/water partition coefficient, indicating the importance of the hydrophobicity of chemicals for their toxicities. 2) The QSARs of anesthetic organic solvents were reviewed. The chemicals analysed were ethers, alkanes, ketones, miscellaneous chemicals and anesthetic gases. It is shown that the relative anesthetic potency of anesthetic gases depends not only on the hydrophobicity expressed by log P but on a polar factor, while the potency of other chemicals depends largely on log P. 3) The relationship of the structure of organic solvents to skin penetration or absorption was reviewed. QSARs reveal that the potency of skin penetration or absorption of solvents is a function of water solubility, log P or hydrogen bond number, each relating to hydrophobicity. 4) Some organic solvents have an effect on the upper respiratory tract. The established QSAR models considerably resemble corresponding equations for gas/liquid partition coefficients into organic bases such as tricresylphosphate. 5) The ecotoxicity of chemicals including solvents was reviewed. Overall, the relative toxic potency of chemicals is related linearly to log P, indicating the importance of hydrophobicity in determining the toxicity of chemicals. 6) Although no QSAR has modeled the mutagenic activity of organic solvents, a few studies show the relationship between the structure and mutagenicity of haloalkenes. Finally, if QSAR could model the toxicity of a series of chemicals, it would serve our purpose of understanding the mechanism of toxicity and of predicting the toxic potency of chemicals in the same series tested.
工业中使用的化学品数量在不断增加,因此化学工业中的工人被认为有很多接触化学品的机会。对于有机溶剂,尽管许多研究已经表明了单一化学品的毒性,但从定量构效关系(QSAR)角度描述其毒性的研究相对较少。在本文中,我首先介绍了QSAR方法(Hansch方法)的概要,然后综述了关于工业化学品QSAR的文献,主要是有机溶剂及相关化学品,内容如下:1)对氯酚、醇类、胺类、苯胺类、酚类、醚类、烷烃、酮类、丙烯酸酯类、甲基丙烯酸酯类和腈类的一般毒性研究进行了综述。几乎在所有情况下,一般毒性都与log P相关,其中P是正辛醇/水分配系数,这表明化学品的疏水性对其毒性的重要性。2)对麻醉性有机溶剂的QSAR进行了综述。分析的化学品包括醚类、烷烃、酮类、其他化学品和麻醉气体。结果表明,麻醉气体的相对麻醉效力不仅取决于由log P表示的疏水性,还取决于一个极性因素,而其他化学品的效力在很大程度上取决于log P。3)综述了有机溶剂结构与皮肤渗透或吸收的关系。QSAR表明,溶剂的皮肤渗透或吸收能力是水溶性、log P或氢键数的函数,每种都与疏水性相关。4)一些有机溶剂对上呼吸道有影响。已建立的QSAR模型与进入有机碱(如磷酸三甲苯酯)的气/液分配系数的相应方程非常相似。5)对包括溶剂在内的化学品的生态毒性进行了综述。总体而言,化学品的相对毒性效力与log P呈线性相关,这表明疏水性在确定化学品毒性方面的重要性。6)尽管没有QSAR模型模拟有机溶剂的致突变活性,但一些研究表明了卤代烯烃的结构与致突变性之间的关系。最后,如果QSAR能够模拟一系列化学品的毒性,它将有助于我们理解毒性机制并预测同一测试系列中化学品的毒性效力。