Cementless or hybrid total elbow arthroplasty with titanium-alloy implants. A study of interim clinical results and specific complications.

Twenty-six patients (32 elbows) with rheumatoid arthritis had a total elbow arthroplasty with insertion of a cementless prosthesis. The humeral component was made of titanium alloy and it was fixed without cement in all elbows. The patients were followed for an average of 3 years 1 month (range, 2 years 2 months to 4 years 4 months). A good result was seen in 25 elbows, a fair result in 2, and a poor result in 5. The reason for the poor results was a breakage of the humeral component at the junctional portion of its stem. In all five of these elbows a marked resorption of bone mass within the condylar portion of the humeral component was observed on the lateral radiograph. The five elbows with a poor result had a revision operation, and in each of these black staining of the soft tissues within the joint was seen. This tissue metallosis due to wear debris of the titanium alloy was responsible for the osteolysis within the condylar portion. It became clear from this study that even in a non-weight-bearing joint, such as the elbow, titanium alloy may wear and result in tissue metallosis when used as a bearing surface of the implant. However, it was also found that in the majority of the elbows an establishment of the biologic fixation of the porous-coated stem could be achieved by use of this alloy.