Bartonícek J, Stehlík J
Ortopedická klinika 3. lékarské fakulty KU, Praha.
Acta Chir Orthop Traumatol Cech. 1994;61(2):109-22.
Proceeding from the literature survey and on the basis of his own experience the author presents a current concept review of the problems of the transpedicular stabilization in fractures of the thoracolumbar spine. Individual chapters are devoted to the biomechanics and transpedicular screw placement, classification of implants and to the transpedicular operations on the injured vertebral body. Based on both his own experience and survey of the literature the author recommends the following: in order to increase the stability of osteosynthesis to place transpedicular screw in anteromedial direction (Magerl approach) close to the anterior cortex of the vertebral body or (in case of osteoporosis) to perforate it by tip of the screw. in fractures with the compression of vertebral body (mainly in case of burst fractures) to perform transpedicular reduction and cancellous bone grafting after Daniaux and Dick. Out of the implants so far used the author considers the best Fixateur interne (Dick) allowing facultless reduction as well as a longterm stabilization of the fracture.
基于文献综述并结合自身经验,作者对胸腰椎骨折经椎弓根固定问题进行了当前概念回顾。各章节分别论述了生物力学与经椎弓根螺钉置入、植入物分类以及对损伤椎体的经椎弓根手术。基于自身经验和文献调研,作者建议如下:为增加骨合成稳定性,将经椎弓根螺钉沿前内侧方向(马格勒入路)置于靠近椎体前皮质处,或(在骨质疏松情况下)用螺钉尖端穿透椎体前皮质;对于椎体压缩性骨折(主要是爆裂骨折),按照达尼奥和迪克的方法进行经椎弓根复位及松质骨植骨。在目前使用的植入物中,作者认为最好的是内固定器(迪克),它能实现无阻力复位以及骨折的长期稳定。