Suppr超能文献

脑动脉的血管尺寸遵循最小功原理。

Vascular dimensions of the cerebral arteries follow the principle of minimum work.

作者信息

Rossitti S, Löfgren J

机构信息

Department of Neurosurgery, University of Göteborg, Sahlgrenska Hospital, Sweden.

出版信息

Stroke. 1993 Mar;24(3):371-7. doi: 10.1161/01.str.24.3.371.

Abstract

BACKGROUND AND PURPOSE

The principle of minimum work is a parametric optimization model for the growth and adaptation of arterial trees. It establishes a balance between energy dissipation due to frictional resistance of laminar flow (shear stress) and the minimum volume of the vascular system, implying that the radius of the vessel is adjusted to the cube root of the volumetric flow. The purpose of this study is to verify whether the internal carotid artery system obeys the principle of minimum work.

METHODS

Measurements of the radius of parent and branch segments of the internal carotid, anterior, and middle cerebral arteries were performed on analog angiographs chosen at random from a set classified as normal. The branch angles were measured from lateral projections in bifurcations of the anterior cerebral artery. The relation of the calibers of parent and branch vessels was analyzed.

RESULTS

The area ratio of the bifurcations (N = 174) was 1.2 +/- 0.4 (mean +/- SD). The equation (r0)n = (r1)n + (r2)n was solved for n, resulting in n = 2.9 +/- 0.7 (mean +/- SD, N = 157). Optimum proportions between the radii of parent (r0) and branch (r1 and r2) vessels in the internal carotid artery system were verified in normal carotid angiographs up to four branch generations, according to the theoretical equation r0(3) = r1(3) + r2(3) (r = 0.989, N = 174). No clear correlation was found between the measured branch angles, the relative branch cross-sectional area, and the theoretical optimum angles.

CONCLUSIONS

This study demonstrates that the process of branching of the internal carotid artery system obeys the principle of minimum work, as the diameter exponent approximates 3. The principle of minimum work establishes strict functional relations between volumetric flow, flow velocity, and vessel radius. This model was extended to parametric optimization of branch angles, which has proved irrelevant in terms of functional optimization. Our results corroborate this finding. Shear stress-induced endothelial mediation seems to be the regulating mechanism for the maintenance of this optimum vessel design. The magnitude of wall shear stress is the same at every point in a vascular network obeying the principle of minimum work, because the flow rate influences the shear stress proportionally to the third power of the vessel radius. This observation has implications for understanding the remodeling of the cerebral vascular network in the presence of arteriovenous malformations and for the pathogenesis of saccular aneurysms.

摘要

背景与目的

最小功原理是动脉树生长与适应的一种参数优化模型。它在层流摩擦阻力(剪切应力)导致的能量耗散与血管系统的最小体积之间建立了平衡,这意味着血管半径会根据体积流量的立方根进行调整。本研究的目的是验证颈内动脉系统是否遵循最小功原理。

方法

从一组分类为正常的模拟血管造影片中随机选取,测量颈内动脉、大脑前动脉和大脑中动脉的主干及分支段的半径。从大脑前动脉分叉处的侧位投影测量分支角度。分析主干血管和分支血管管径之间的关系。

结果

分叉处的面积比(N = 174)为1.2±0.4(平均值±标准差)。求解方程(r0)n = (r1)n + (r2)n中的n,结果为n = 2.9±0.7(平均值±标准差,N = 157)。根据理论方程r0(3) = r1(3) + r2(3)(r = 0.989,N = 174),在正常颈动脉造影片中,直至四代分支,颈内动脉系统中主干(r0)与分支(r1和r2)血管半径之间的最佳比例得到了验证。在测量的分支角度、相对分支横截面积与理论最佳角度之间未发现明显相关性。

结论

本研究表明,颈内动脉系统的分支过程遵循最小功原理,因为直径指数接近3。最小功原理在体积流量、流速和血管半径之间建立了严格的函数关系。该模型扩展到了分支角度的参数优化,事实证明这在功能优化方面并无关联。我们的结果证实了这一发现。剪切应力诱导的内皮介导似乎是维持这种最佳血管设计的调节机制。在遵循最小功原理的血管网络中,壁面剪切应力的大小在每个点都是相同的,因为流量与剪切应力成正比,与血管半径的三次方相关。这一观察结果对于理解存在动静脉畸形时脑血管网络的重塑以及囊状动脉瘤的发病机制具有重要意义。

文献AI研究员

20分钟写一篇综述,助力文献阅读效率提升50倍。

立即体验

用中文搜PubMed

大模型驱动的PubMed中文搜索引擎

马上搜索

文档翻译

学术文献翻译模型,支持多种主流文档格式。

立即体验