Suppr超能文献

在山羊模型中评估多孔双相磷酸钙陶瓷用于颈椎前路椎间融合的效果。

Evaluation of porous biphasic calcium phosphate ceramics for anterior cervical interbody fusion in a caprine model.

作者信息

Toth J M, An H S, Lim T H, Ran Y, Weiss N G, Lundberg W R, Xu R M, Lynch K L

机构信息

Department of Orthopaedic Surgery, Medical College of Wisconsin, Milwaukee, USA.

出版信息

Spine (Phila Pa 1976). 1995 Oct 15;20(20):2203-10. doi: 10.1097/00007632-199510001-00005.

Abstract

STUDY DESIGN

This study compared the efficacy of characterized 50/50 hydroxyapatite/beta-tricalcium phosphate ceramics of 30%, 50%, and 70% porosity and autograft to promote interbody spinal fusion at C2-C3 and C5-C6 in 24 goats: 12 at 3 months and 12 at 6 months.

OBJECTIVES

Radiographs, histology, dual energy x-ray absorptiometry analysis, and biomechanical testing were used to evaluate the ability of the 30%, 50%, and 70% porous 50/50 hydroxyapatite/beta-tricalcium phosphate ceramics and autograft to promote cervical interbody fusion.

SUMMARY OF BACKGROUND DATA

The conundrum in the use of calcium phosphates for interbody fusion is what porosity is most effective to promote ingrowth yet strong enough to resist compressive stresses found in the spine? It is known that the ability for bone ingrowth increases and the compressive strength decreases as porosity of the ceramic is increased. Dense ceramics remain intact but may be surrounded by fibrous tissue. Porous ceramics have good ingrowth but may fracture.

METHODS

Radiographs were evaluated for fusion and fracture or collapse of the ceramics or autograft. Dual energy x-ray absorptiometry was used to evaluate the fusion mass. Treated motion segments underwent biomechanical testing to quantify the flexibility of the segment. Undecalcified and decalcified histologic analysis were performed to evaluate the presence or absence of a bony union.

RESULTS

Thirty percent, 50%, and 70% porous ceramics had better radiographic fusion scores than the autograft at 3 and 6 months. Incidence of ceramic fracture did not increase with porosity and was equivalent to the collapse of autograft, although ceramics maintained disc height when fracture occurred. No statistically significant differences were found between autograft and the porous ceramics with biomechanical testing and peri-implant bone mineral density values as measured by dual energy x-ray absorptiometry. At 3 months, histologic analysis showed a union rate of 0% for autograft and 30% porous ceramic, 67% for 50% porous ceramic, and 83% for 70% porous ceramic. At 6 months, the union rate was 67% for the 30%, 50%, and 70% porous ceramics and 50% for autograft.

CONCLUSIONS

Thirty percent, 50%, and 70% porous ceramics performed equal to or better than autogenous bone after 3 and 6 months. There may be promise for the use of 50/50 hydroxyapatite/beta-tricalcium phosphate in spine surgery as the need to harvest autograft from the iliac crest is obviated, and complications and cost associated with the harvest are avoided.

摘要

研究设计

本研究比较了孔隙率分别为30%、50%和70%的特定50/50羟基磷灰石/β-磷酸三钙陶瓷以及自体骨移植在促进24只山羊C2-C3和C5-C6椎体间融合方面的疗效,其中12只在3个月时评估,12只在6个月时评估。

目的

通过X线片、组织学、双能X线吸收法分析和生物力学测试,评估孔隙率为30%、50%和70%的50/50羟基磷灰石/β-磷酸三钙陶瓷以及自体骨移植促进颈椎椎体间融合的能力。

背景资料总结

在椎体间融合中使用磷酸钙的难题在于,何种孔隙率最有效地促进骨长入,同时又足够坚固以抵抗脊柱中发现的压缩应力?众所周知,随着陶瓷孔隙率的增加,骨长入能力增强而抗压强度降低。致密陶瓷保持完整,但可能被纤维组织包围。多孔陶瓷有良好的骨长入,但可能发生骨折。

方法

评估X线片以观察陶瓷或自体骨移植的融合、骨折或塌陷情况。使用双能X线吸收法评估融合块。对处理后的运动节段进行生物力学测试以量化节段的柔韧性。进行未脱钙和脱钙组织学分析以评估是否存在骨融合。

结果

在3个月和6个月时,孔隙率为30%、50%和70%的陶瓷在X线融合评分上优于自体骨移植。陶瓷骨折的发生率并未随孔隙率增加,且与自体骨移植的塌陷情况相当,不过骨折发生时陶瓷能保持椎间盘高度。在生物力学测试以及通过双能X线吸收法测量的种植体周围骨矿物质密度值方面,自体骨移植与多孔陶瓷之间未发现统计学显著差异。在3个月时,组织学分析显示自体骨移植的融合率为0%,孔隙率为30%的陶瓷为30%,孔隙率为50%的陶瓷为67%,孔隙率为70%的陶瓷为83%。在6个月时,孔隙率为30%、50%和70%的陶瓷融合率为67%,自体骨移植为50%。

结论

孔隙率为30%、50%和70%的陶瓷在3个月和6个月后的表现等同于或优于自体骨。50/50羟基磷灰石/β-磷酸三钙在脊柱手术中的应用可能具有前景,因为无需从髂嵴获取自体骨移植,避免了与获取相关的并发症和成本。

文献检索

告别复杂PubMed语法,用中文像聊天一样搜索,搜遍4000万医学文献。AI智能推荐,让科研检索更轻松。

立即免费搜索

文件翻译

保留排版,准确专业,支持PDF/Word/PPT等文件格式,支持 12+语言互译。

免费翻译文档

深度研究

AI帮你快速写综述,25分钟生成高质量综述,智能提取关键信息,辅助科研写作。

立即免费体验