Emery S E, Fuller D A, Stevenson S
Department of Orthopaedics, Case Western Reserve University, Cleveland, Ohio, USA.
Spine (Phila Pa 1976). 1996 Dec 1;21(23):2713-9. doi: 10.1097/00007632-199612010-00003.
Three types of porous ceramic bone graft substitutes were used for anterior interbody fusion in the canine thoracic spine.
To compare the biomechanical stiffness and histologic appearance of fused spinal segments using ceramic graft substitutes versus autogenous bone graft.
The relative success or failure of ceramic grafts is influenced by many variables, including the composition of the ceramic, location in the spine, stability, and the animal model used.
Four experimental groups were evaluated: autogenous tricortical iliac crest (n = 6); hydroxyapatite ceramic (Interpore-200; n = 6); biphasic (60 : 40) hydroxyapatite/tricalcium phosphate ceramic (Zimmer; n = 4); and calcium carbonate ceramic (Inoteb; n = 4). All dogs were killed 8 weeks after surgery. After postmortem removal of anterior spinal instrumentation, the spinal segments underwent nondestructive biomechanical testing and light microscopic histologic evaluation.
Biomechanical testing showed that spines from the autogenous tricortical iliac crest group were statistically significantly stiffer in flexion, extension, left and right bending, and torsion than all ceramic groups. No differences in stiffnesses were observed among the three ceramic groups. Histologically, the autogenous tricortical iliac crest graft performed best, with osseous union at 10 of 12 interfaces. Of the ceramic grafts, hydroxyapatite/tricalcium phosphate and calcium carbonate demonstrated more consistent junction healing than the hydroxyapatite group, where four of 12 interfaces resulted in a nonunion. In the ceramic groups, a variable amount of revascularization and new bone was observed within the grafts.
Autogenous iliac crest bone graft provides superior healing in this anterior spine fusion model. Additional investigation is needed before ceramic grafts can be considered satisfactory alternatives to anterior autogenous bone grafts.
三种类型的多孔陶瓷骨移植替代物用于犬胸椎前路椎间融合术。
比较使用陶瓷移植替代物与自体骨移植的融合脊柱节段的生物力学刚度和组织学外观。
陶瓷移植的相对成败受许多变量影响,包括陶瓷的成分、脊柱中的位置、稳定性以及所使用的动物模型。
评估四个实验组:自体三面皮质髂嵴(n = 6);羟基磷灰石陶瓷(Interpore - 200;n = 6);双相(60 : 40)羟基磷灰石/磷酸三钙陶瓷(Zimmer;n = 4);以及碳酸钙陶瓷(Inoteb;n = 4)。所有犬在术后8周处死。死后移除前路脊柱内固定器械后,对脊柱节段进行无损生物力学测试和光学显微镜组织学评估。
生物力学测试表明,自体三面皮质髂嵴组的脊柱在屈曲、伸展、左右弯曲和扭转方面的刚度在统计学上显著高于所有陶瓷组。三个陶瓷组之间未观察到刚度差异。组织学上,自体三面皮质髂嵴移植效果最佳,12个界面中有10个实现了骨愈合。在陶瓷移植中,羟基磷灰石/磷酸三钙和碳酸钙的界面愈合比羟基磷灰石组更一致,羟基磷灰石组12个界面中有4个未愈合。在陶瓷组中,移植体内观察到不同程度的血管再生和新骨形成。
在这种前路脊柱融合模型中,自体髂嵴骨移植提供了更好的愈合效果。在陶瓷移植可被视为前路自体骨移植的满意替代物之前,还需要进一步研究。