Cafruny W A, Brunick A, Nelson D M, Nelson R F
Department of Microbiology, School of Medicine, University of South Dakota, Vermillion, SD 57069-2390, USA.
Am J Dent. 1995 Jun;8(3):152-6.
To quantitate blood contamination present on dental instruments used for routine prophylaxis and to assess the effectiveness of ultrasonic decontamination in reducing blood and virus contamination on dental instruments.
Human blood contamination present on dental instruments obtained after routine prophylaxis was analyzed using IgG as a blood marker.
The estimated contaminating blood volume was found to normally range between 1.4 x 10(-6) to 2.0 x 10(-4) ml. Attempts to saturate the instruments with blood contamination suggested that the maximum possible retained blood volume was about 10-fold higher than the normal levels of contamination. Hand scrubbing of contaminated instruments was both relatively ineffective and inconsistent in removing blood contamination. Decontamination in an ultrasonic cleaner was more effective than hand washing, resulting in greater than a 100-fold reduction of blood contamination. Using a mouse model virus (lactate dehydrogenase-elevating virus, LDV), high levels of virus contamination of dental instruments and dental handpieces were achieved, as determined by assay of residual virus. Ultrasonic treatment reduced the level of virus contamination present on dental instruments by one million-fold, and virus contamination present in dental handpieces was reduced by one thousand-fold. These results provide quantitative estimations of the infection threat and its reduction by ultrasonication, posed by human-exposed dental instruments.
对用于常规预防治疗的牙科器械上存在的血液污染进行定量分析,并评估超声去污在减少牙科器械上的血液和病毒污染方面的有效性。
以IgG作为血液标志物,分析常规预防治疗后获得的牙科器械上存在的人类血液污染情况。
发现估计的污染血液量通常在1.4×10⁻⁶至2.0×10⁻⁴毫升之间。使器械被血液污染达到饱和的尝试表明,最大可能残留血液量比正常污染水平高约10倍。对被污染器械进行手工刷洗在去除血液污染方面相对无效且效果不稳定。在超声清洗器中进行去污比手工清洗更有效,可使血液污染减少100倍以上。使用小鼠模型病毒(乳酸脱氢酶升高病毒,LDV),通过检测残留病毒确定,牙科器械和牙科手机实现了高水平的病毒污染。超声处理使牙科器械上的病毒污染水平降低了100万倍,牙科手机上的病毒污染降低了1000倍。这些结果提供了对人类接触过的牙科器械所构成的感染威胁及其通过超声处理降低程度的定量估计。