Pigeon P, Yahia L, Feldman A G
Institut de génie biomédical, Ecole Polytechnique de Montréal, Québec, Canada.
J Biomech. 1996 Oct;29(10):1365-70. doi: 10.1016/0021-9290(96)00031-0.
Modeling of musculoskeletal structures requires accurate data on anatomical parameters such as muscle lengths (MLs), moment arms (MAs) and those describing the upper limb position. Using a geometrical model of planar arm movements with three degrees of freedom, we present, in an analytical form, the available information on the relationship between MAs and MLs and joint angles for thirteen human upper limb muscles. The degrees of freedom included are shoulder flexion/extension, elbow flexion/extension, and either wrist flexion/extension (the forearm in supination) or radial/ulnar deviation (the forearm in mid-pronation). Previously published MA/angle curves were approximated by polynomials. ML/angle curves were obtained by combining the constant values of MLs (defined by the distance between the origin and insertion points for a specific upper limb position) with a variable part obtained by multiplying the MA (joint radius) and the joint angle. The MAs of the prime wrist movers in radial/ulnar deviation were linear functions of the joint angle (R2 > or = 0.9954), while quadratic polynomials accurately described their MAs during wrist flexion/extensions. The relationship between MAs and the elbow angle was described by 2nd, 3rd or 5th-order polynomials (R2 > or = 0.9904), with a lesser quality of fit for the anconeus (R2 = 0.9349). In the full range of angular displacements, the length of wrist, elbow and shoulder muscles can change by 8.5, 55 and 200%, respectively.
肌肉骨骼结构的建模需要有关解剖学参数的准确数据,如肌肉长度(MLs)、力臂(MAs)以及描述上肢位置的参数。利用具有三个自由度的平面手臂运动几何模型,我们以解析形式给出了关于13块人类上肢肌肉的力臂与肌肉长度以及关节角度之间关系的可用信息。所包含的自由度为肩关节屈伸、肘关节屈伸以及腕关节屈伸(前臂旋后)或桡尺偏斜(前臂中立位旋前)。先前发表的力臂/角度曲线用多项式进行近似。肌肉长度/角度曲线是通过将肌肉长度的恒定值(由特定上肢位置的起点和止点之间的距离定义)与通过将力臂(关节半径)和关节角度相乘得到的可变部分相结合而获得的。在桡尺偏斜时,主要腕部运动肌的力臂是关节角度的线性函数(R2≥0.9954),而二次多项式能准确描述它们在腕关节屈伸时的力臂。力臂与肘关节角度之间的关系用二阶、三阶或五阶多项式描述(R2≥0.9904),对于肘肌的拟合质量较低(R2 = 0.9349)。在整个角位移范围内,腕部、肘部和肩部肌肉的长度可分别变化8.5%、55%和200%。