Suppr超能文献

电视辅助胸腔镜治疗原发性自发性气胸

Video-assisted thoracoscopic management of primary spontaneous pneumothorax.

作者信息

Yim A P

机构信息

Department of Surgery, Chinese University of Hong Kong Prince of Wales Hospital, Hong Kong.

出版信息

Ann Acad Med Singap. 1996 Sep;25(5):668-72.

PMID:8924002
Abstract

Although video-assisted thoracoscopic surgery (VATS) is now accepted by many as the approach of choice in the management of primary spontaneous pneumothorax (PSP), the optimal procedure and timing of surgical intervention remain as areas of contention. The author reviewed his personal experience with 224 consecutive VATS procedures for PSP. Mechanical pleurodesis was performed in every case and was the only procedure in 20 patients. We had experienced with several means of eliminating subpleural bullae once identified: stapled bullectomy (151), endoloop (12), argon beam coagulation (6) and endoscopic suturing (35). There were no mortality or intraoperative complications. The median postoperative hospital stay was 3 days. So far, we have had 4 recurrences (1.8%) after a mean follow-up of 20 months (range 1 to 36 months). Complications consisted of 10 persistent air leaks, 1 wound complication, and 1 chest wall bleeding. We conclude that 1) VATS is a safe and effective approach in the treatment of PSP; 2) Stapled-bullectomy is quick and reliable but costly; 3) Endoloop and suturing are viable alternative techniques that may prove to be more cost effective; and 4) we do not recommend the use of argon beam coagulation as the primary treatment modality.

摘要

尽管电视辅助胸腔镜手术(VATS)如今已被许多人视为原发性自发性气胸(PSP)治疗的首选方法,但手术干预的最佳术式和时机仍存在争议。作者回顾了其连续224例PSP患者接受VATS手术的个人经验。每例患者均进行了机械性胸膜固定术,其中20例患者仅接受了该手术。一旦发现胸膜下肺大疱,我们采用了多种方法予以处理:吻合器切除肺大疱(151例)、圈套器(12例)、氩气刀凝固(6例)及内镜缝合(35例)。无死亡病例及术中并发症。术后中位住院时间为3天。截至目前,平均随访20个月(1至36个月)后有4例复发(1.8%)。并发症包括10例持续性漏气、1例伤口并发症及1例胸壁出血。我们得出以下结论:1)VATS是治疗PSP的一种安全有效的方法;2)吻合器切除肺大疱快速可靠但费用高昂;3)圈套器和缝合是可行的替代技术,可能更具成本效益;4)我们不建议将氩气刀凝固作为主要治疗方式。

文献AI研究员

20分钟写一篇综述,助力文献阅读效率提升50倍。

立即体验

用中文搜PubMed

大模型驱动的PubMed中文搜索引擎

马上搜索

文档翻译

学术文献翻译模型,支持多种主流文档格式。

立即体验