Suppr超能文献

表面活性剂膜形成的快速体外测试:Exerowa黑膜法的优势

Rapid in vitro tests of surfactant film formation: advantages of the Exerowa black film method.

作者信息

Cordova M, Mautone A J, Scarpelli E M

机构信息

Perinatology Center, New York Hospital Cornell University Medical Center, Cornell University College of Medicine, NY 10021, USA.

出版信息

Pediatr Pulmonol. 1996 Jun;21(6):373-82. doi: 10.1002/(SICI)1099-0496(199606)21:6<373::AID-PPUL5>3.0.CO;2-M.

Abstract

Based on our research, the natural configuration of surfactant from birth through adulthood takes the form of intraalveolar bubbles. Thus, bubble film analysis would seem to be the specific in vitro testing method for lung surfactant. In the present study we report a battery of five in vitro tests for assessing structural and functional properties of surfactant bubbles and bubble films from hydrophobic extracts, namely, the therapeutic surfactants Survanta (SU) and Infasurf (IN) (full strength and diluted to 3 mg phospholipid/mL) and from aqueous extracts from rabbit lung lavage at 3 mg phospholipid/mL (SAM). Each substrate was assessed by: 1) Shake test: stable bubbles from SU, IN, and SAM (50/50, v/v in 95% ethanol) covered the peripheral surfaces, indicating positive response; bubble production by IN and SAM always exceeded SU; 2) Click test: bubble clicking began immediately in all preparations except for undiluted SU, in which the onset of clicking was delayed more than 40 sec; 3) Pattle's stability test: diameters of SU, IN, and SAM bubbles were unchanged for more than 20 min in aerated solution, indicating stable very low surface tension; 4) bubble generation by gas dispersion from a single capillary: full-strength concentration of SU and IN produced relatively large bubbles-bubble rate (number/min) and size were comparable; all SU bubbles rupture in < 25 min, whereas IN bubbles were stable for > 30 min; and 5) Exerowa black film method: in contrast with each of the preceding methods for studying intact bubbles, the Exerowa method focuses on the contact between bubble films and permits direct observation of film formation and determination of film structure. Stable black films were formed spontaneously by both IN (full strength and diluted) and SAM. Conversely, SU (full strength) formed no black films but stable rheological films. Diluted SU films ruptured in 50% of trials. Since methods 1, 2, and 3 were nondiscriminatory and method 4 produced unphysiologically large bubbles for most mammals, we concluded that the black film method of Exerowa is the most discriminating of the tests studied here. It provides a unique visual record of foam film formation and stability and clearly defines differences relative to both the nature and concentration of the preparations.

摘要

基于我们的研究,从出生到成年,表面活性剂的自然形态为肺泡内气泡。因此,气泡膜分析似乎是检测肺表面活性剂的特定体外测试方法。在本研究中,我们报告了一系列五项体外测试,用于评估来自疏水提取物(即治疗性表面活性剂Survanta(SU)和Infasurf(IN),全强度以及稀释至3mg磷脂/mL)和来自兔肺灌洗水提取物(3mg磷脂/mL,SAM)的表面活性剂气泡和气泡膜的结构和功能特性。每种底物通过以下方式评估:1)振荡测试:SU、IN和SAM(在95%乙醇中50/50,v/v)产生的稳定气泡覆盖周边表面,表明呈阳性反应;IN和SAM产生的气泡总是超过SU;2)点击测试:除未稀释的SU外,所有制剂中气泡点击立即开始,未稀释的SU中点击开始延迟超过40秒;3)帕特尔稳定性测试:在通气溶液中,SU、IN和SAM气泡的直径在20多分钟内保持不变,表明表面张力极低且稳定;4)通过单毛细管气体分散产生气泡:SU和IN的全强度浓度产生相对较大的气泡——气泡速率(个/分钟)和大小相当;所有SU气泡在<25分钟内破裂,而IN气泡在>30分钟内保持稳定;5)Exerowa黑膜法:与之前研究完整气泡的每种方法不同,Exerowa方法关注气泡膜之间的接触,并允许直接观察膜的形成和确定膜的结构。IN(全强度和稀释)和SAM均自发形成稳定的黑膜。相反,SU(全强度)未形成黑膜,但形成了稳定的流变膜。稀释的SU膜在50%的试验中破裂。由于方法1、2和3无鉴别性,方法4对大多数哺乳动物产生非生理性的大气泡,我们得出结论,Exerowa黑膜法是此处研究的测试中最具鉴别性的。它提供了泡沫膜形成和稳定性的独特视觉记录,并清楚地定义了相对于制剂性质和浓度的差异。

文献AI研究员

20分钟写一篇综述,助力文献阅读效率提升50倍。

立即体验

用中文搜PubMed

大模型驱动的PubMed中文搜索引擎

马上搜索

文档翻译

学术文献翻译模型,支持多种主流文档格式。

立即体验