Suppr超能文献

对英国全科医疗中常用于深龋洞的材料所引发的第三期牙本质形成进行量化分析。

The quantification of tertiary dentine formation in response to materials commonly placed in deep cavities in general practice in the UK.

作者信息

Santini A, Ivanovic V

机构信息

Department of Conservative Dentistry, University of Edinburgh.

出版信息

Prim Dent Care. 1996 Mar;3(1):14-22.

PMID:8941804
Abstract

PURPOSE OF STUDY

To determine the rate of formation of tertiary dentine in dogs' teeth, in response to five commonly used lining materials. Also, to record the resulting differences in quality of the formed dentine.

MATERIALS AND METHODS

Representatives of five types of materials commonly used in general practice in the UK were placed in deep standardised cavities with a remaining dentine thickness of 400-500 microns, and sealed to the cavo-surface with zinc oxide-eugenol. The daily rate of tertiary dentine formed in response to each material was measured over a period of 119 days using a tetracycline staining method. A concomitant study to show the quality of the formed dentine was undertaken using the same materials and experimental conditions.

RESULTS

There was a significant difference between the rates of tertiary dentine formation for all materials except zinc oxide-eugenol and Ledermix paste. For each material there was a increased rate of tertiary dentine formation in the second period (29-49 days) compared to the first period (0-28 days). This is considered to be due, in part, to a lag period when damaged odontoblasts are differentiating from mesenchymal elements. The rate of tertiary dentine formation in response to all the test materials was always greater than that of normal physiological dentine formation in unprepared teeth. Qualitatively, there was difference in the formed tertiary dentine beneath each material. All the materials caused odontoblast destruction, altered ground substance production and alterations in the calcification process.

CONCLUSION

None of the materials routinely used at present can be considered to be 'ideal' as odontoblast destruction, altered ground substance production and altered calcification occur beneath zinc oxide-eugenol preparations, calcium hydroxide preparations as well as in response to corticosteroid-containing materials such as Ledermix paste and cement.

摘要

研究目的

确定犬牙中第三期牙本质的形成速率,以回应五种常用的垫底材料。同时,记录所形成牙本质在质量上的差异。

材料与方法

将英国普通牙科实践中常用的五种材料的代表置于深度标准化的窝洞中,剩余牙本质厚度为400 - 500微米,并用氧化锌丁香酚封闭窝洞表面。在119天的时间里,使用四环素染色法测量每种材料刺激下形成的第三期牙本质的每日形成速率。使用相同的材料和实验条件进行一项同步研究,以显示所形成牙本质的质量。

结果

除氧化锌丁香酚和Ledermix糊剂外,所有材料的第三期牙本质形成速率之间存在显著差异。与第一阶段(0 - 28天)相比,每种材料在第二阶段(29 - 49天)的第三期牙本质形成速率均有所增加。这部分被认为是由于受损成牙本质细胞从间充质成分分化时存在一个滞后期。所有测试材料刺激下的第三期牙本质形成速率始终大于未处理牙齿中正常生理牙本质的形成速率。在质量上,每种材料下方形成的第三期牙本质存在差异。所有材料均导致成牙本质细胞破坏、基质产生改变以及钙化过程改变。

结论

目前常规使用的材料中,没有一种可以被认为是“理想的”,因为在氧化锌丁香酚制剂、氢氧化钙制剂以及含皮质类固醇的材料(如Ledermix糊剂和粘固剂)下方,都会出现成牙本质细胞破坏、基质产生改变和钙化改变的情况。

文献AI研究员

20分钟写一篇综述,助力文献阅读效率提升50倍。

立即体验

用中文搜PubMed

大模型驱动的PubMed中文搜索引擎

马上搜索

文档翻译

学术文献翻译模型,支持多种主流文档格式。

立即体验