Bouchet-Bernet C, Spyratos F, Andrieu C, Deytieux S, Bécette V, Oglobine J
Laboratoire d'Immunochimie, Centre René Huguenin, St. Cloud, France.
Breast Cancer Res Treat. 1996;41(2):141-6. doi: 10.1007/BF01807159.
The levels of uPA, its inhibitors PAI-1 and PAI-2, and the uPA receptor (uPAR) have prognostic value in breast cancer. However, different extraction methods and assays kits are used in different laboratories and may directly influence the levels observed. To define a buffer suitable for both PAI-2 and uPAR extraction from breast cancer tissue compatible with hormone receptors and other cytosolic prognosticator assays, we compared PAI-2 and uPAR values obtained by immunoenzymatic assays (American Diagnostica, Greenwhich, USA) in several extraction conditions: 1) cytosol obtained with the standard hormone receptor buffer; 2) solubilized pellets obtained by Triton X100 extraction of the pelleted membranes obtained with standard hormone receptor buffer; 3) cytosol obtained by direct extraction in the buffer (containing Triton X100) recommended by the manufacturer, after 2 hours or 12 hours of incubation. Cytosol extracts prepared using the standard procedure recommended for hormone receptors gave the highest PAI-2 values. The highest uPAR values were obtained in the subsequent detergent extraction of the pelleted membranes. PAI-2 levels obtained with the kit manufacturer's method after 12 hours of incubation were lower than those obtained after 2 hours of incubation, whereas uPAR levels were similar. We conclude that the most suitable extraction protocol employs standard hormone receptor extraction buffer to obtain a supernatant cytosol fraction for PAI-2 assay, and subsequent detergent extraction of the pelleted membranes to obtain an extract suitable for uPAR.
尿激酶型纤溶酶原激活物(uPA)及其抑制剂纤溶酶原激活物抑制剂-1(PAI-1)和纤溶酶原激活物抑制剂-2(PAI-2)以及uPA受体(uPAR)的水平在乳腺癌中具有预后价值。然而,不同实验室使用不同的提取方法和检测试剂盒,这可能直接影响所观察到的水平。为了确定一种既适合从乳腺癌组织中提取PAI-2和uPAR,又与激素受体及其他细胞溶质预后指标检测兼容的缓冲液,我们比较了在几种提取条件下通过免疫酶法(美国诊断公司,美国格林威治)获得的PAI-2和uPAR值:1)用标准激素受体缓冲液获得的细胞溶质;2)用标准激素受体缓冲液获得的沉淀膜经Triton X100提取后得到的溶解沉淀;3)按照制造商推荐的缓冲液(含Triton X100)直接提取,孵育2小时或12小时后获得的细胞溶质。使用推荐用于激素受体的标准程序制备的细胞溶质提取物给出了最高的PAI-2值。在随后对沉淀膜进行去污剂提取时获得了最高的uPAR值。用试剂盒制造商的方法在孵育12小时后获得的PAI-2水平低于孵育2小时后获得的水平,而uPAR水平相似。我们得出结论,最合适的提取方案是采用标准激素受体提取缓冲液获得用于PAI-2检测的上清液细胞溶质部分,随后对沉淀膜进行去污剂提取以获得适合uPAR检测的提取物。