Lazenby R A
Anthropology Programme, University of Northern British Columbia, Prince George, Canada.
Invest Radiol. 1997 Jan;32(1):12-8. doi: 10.1097/00004424-199701000-00003.
Radiogrammetry of the second metacarpal assumes a circular or elliptical model, which does not conform to reality. This study assesses the degree of bias and limits of agreement (error) resulting from deviations from these assumed models for estimates of bone mass and strength.
Forty-six left metacarpals were radiographed in orthogonal posteroanterior and mediolateral views for calculation of algebraic estimations of area and bending moments of area. The bones were then sectioned at midshaft and digitized for determination of actual values of these properties. Bias was determined as the mean difference between methods, and error as +/-2 standard deviation.
Radiogrammetric methods significantly (P < 0.05) overestimate actual values for measures of cortical area and bending strength. Elliptical models are less biased and prone to smaller ranges of error than are uniplanar circular models.
Radiogrammetric estimation of metacarpal bone mass is subject to considerable method error arising from use of an overly simplistic circular model for its midshaft geometry.
第二掌骨的X线测量采用圆形或椭圆形模型,但这与实际情况不符。本研究评估了因偏离这些假定模型而导致的骨量和强度估计偏差程度及一致性界限(误差)。
对46根左手掌骨进行正位和内外侧位X线摄影,以计算面积和面积弯矩的代数估计值。然后将这些骨头在骨干中部进行切片并数字化,以确定这些特性的实际值。偏差定义为两种方法之间的平均差异,误差定义为±2个标准差。
X线测量方法显著(P<0.05)高估了皮质面积和弯曲强度测量的实际值。与单平面圆形模型相比,椭圆形模型的偏差较小,误差范围也较小。
由于对掌骨骨干几何形状使用了过于简单的圆形模型,掌骨骨量的X线测量估计存在相当大的方法误差。