Jet ventilation for fiberoptic bronchoscopy under general anesthesia.

An oxygen jet method ventilating patients during laryngoscopy has been applied to fiberoptic bronchoscopy. A 3.5 mm plastic tube 24.5 cm long was inserted into the trachea through the mouth. An intermittent jet of oxygen at 3.5 atm (50 psi) was applied to this tube using a 1.5 mm ID plastic catheter to ventilate the patient. Anesthesia was accomplished with intravenous thiamylal and Innovar. The patients were paralyzed with continuous succinylcholine. The technique has subsequently been used without complications in more than 1,000 patients. A fluidic ventilator was developed for delivering and controlling the oxygen jet. The airway pressure can be monitored continuously and, by the use of fluidic devices, the jet can be set to cut off automatically if the airway pressure is too high. The above techique for laryngoscopy with the fluidic ventilator was used in 28 patients undergoing fiberoptic bronchoscopy (Olympus 5.7 mm diameter). The airway pressure was continuously monitored with a line attached to the suction port of the bronchoscope. Arterial PCO2 ranged from 23 to 42 mmHg and PO2 from 105 to 325 mmHg. The high PO2 levels were maintained even during suctioning. General anesthesia for fiberoptic bronchoscopy can be performed using an endotracheal tube not smaller than 8 mm internal diameter (ID). The advantages of the oxygen jet technique are that it can be used in smaller patients and that the upper airway can be examined.