Johnson A, Winstanley R B
Department of Restorative Dentistry, School of Clinical Dentistry, University of Sheffield, UK.
J Oral Rehabil. 1997 Dec;24(12):904-8. doi: 10.1046/j.1365-2842.1997.00204.x.
The aim of this study was to determine the average sagittal condylar inclination angles of dentate subjects using a mandibular facebow with pencil tracing styli, to relate these angles to values assigned to articulators, and to assess the repeatability accuracy of drawing a tangent to a traced curve. The right and left sagittal condylar inclination angles of 103 subjects were recorded using a mandibular facebow with pencil tracing styli which marked a graph card during protrusive excursions. Tangents to the tracings were measured with a protractor allowing assessment of reproducibility. The mean left and right sagittal condylar inclination angles were 32 degrees and 31.5 degrees, respectively, with no significant differences (P= 0.609). Individual right and left measurements within each group showed significant differences (P = 0.0000). The mean of the tangents drawn through three sagittal condylar angle tracings by 10 operators was 33.3 degrees, and the mean of 10 tangents drawn through the same three tracings by one of the authors was 32.9 degrees, with no significant difference (P = 0.634). The average sagittal condylar inclination angles found in this study are in agreement with those reported in the literature. In fixed sagittal condylar angle articulators 30 degrees appear to be an appropriate setting. The reproducibility of this method of recording sagittal condylar inclination angles was found to be accurate for the individual operator and between operators.
本研究的目的是使用带有铅笔追踪尖的下颌面弓确定有牙列受试者的平均髁突矢状倾斜角,将这些角度与给牙合架设定的值相关联,并评估绘制追踪曲线切线的可重复性精度。使用带有铅笔追踪尖的下颌面弓记录了103名受试者的左右髁突矢状倾斜角,该面弓在前伸运动时在图表卡上做标记。用分度器测量追踪线的切线,以评估可重复性。左右髁突矢状倾斜角的平均值分别为32度和31.5度,无显著差异(P = 0.609)。每组内个体的左右测量值显示出显著差异(P = 0.0000)。10名操作人员通过三次髁突矢状角追踪线绘制的切线平均值为33.3度,其中一位作者通过相同的三次追踪线绘制的10条切线平均值为32.9度,无显著差异(P = 0.634)。本研究中发现的平均髁突矢状倾斜角与文献报道的一致。在固定髁突矢状角的牙合架中,30度似乎是一个合适的设定。发现这种记录髁突矢状倾斜角方法的可重复性对于个体操作人员以及不同操作人员来说都是准确的。