Olszewski A D, Miller M D, Ritchie J R
Department of Orthopaedics, Wilford Hall Medical Center, Lackland AFB, Texas, USA.
Arthroscopy. 1998 Jan-Feb;14(1):9-14. doi: 10.1016/s0749-8063(98)70114-8.
A successful single-incision endoscopic anterior cruciate ligament reconstruction using bone-patellar tendon-bone autograft requires attention to many technical details. The emphasis of placing the femoral bone plug flush with the opening of the femoral tunnel results in distal shift of the graft. Longer tibial tunnels are required to prevent excessive graft extrusion. The purpose of this study is to compare four direct and indirect measurement methods of tibial tunnel preparation to determine which method can be used to create consistently reproducible tibial tunnels that prevent excessive extrusion or recession of the graft within the tunnel. Tunnels placed at the empiric angles of 40 degrees, 50 degrees, and 60 degrees to the tibial plateau resulted in the incidence of acceptable tibial tunnel lengths of 44%, 83%, and 39%, respectively. Tunnels placed at an angle determined by the formula "N + 7" where 7 degrees is added to the patellar tendon length (N) resulted in acceptable tunnels 89% of the time. Direct measurement methods using the formulas "graft - 50 mm" and "N + 2 mm" resulted in acceptable tibial tunnels of 44% and 100%, respectively. We recommend using the "N + 7" in conjunction with the "N + 2 mm" formula to obtain the advantages of both indirect and direct measurement methods.
