Lai K A, Shen W J, Yang C Y
Department of Orthopaedics, National Cheng Kung University Medical Center, Tainan, Taiwan.
J Bone Joint Surg Am. 1998 Mar;80(3):380-8. doi: 10.2106/00004623-199803000-00011.
Arthrodesis of the knee with use of a short Huckstep nail was performed in thirty-three patients (thirty-three knees) after failure of a non-constrained total knee arthroplasty. The indication for the arthrodesis was an infection in thirty-one knees and a Charcot joint in two. Three knees had had a failed attempt at arthrodesis with use of external fixation. The Huckstep nail was inserted through the knee, retrograde into the femur, and then antegrade into the tibia. The duration of the operation averaged 104 minutes (range, sixty-five to 155 minutes). Local bone graft was used in all knees. At the time of follow-up, at an average of forty-seven months (range, eighteen to ninety-four months), thirty knees (91 per cent) had radiographic evidence of union. The average time to union was 5.2 months (range, two to ten months) after the arthrodesis. Eight knees that had a grossly purulent infection were treated with debridement, which was followed by the arthrodesis as a second-stage procedure; the other knees had a one-stage arthrodesis. Only one of the thirty-one knees that had had an infection before the arthrodesis had a recurrence after it. Arthrodesis with a short Huckstep nail provides immediate axial and rotational stability and allows weight-bearing without use of external support as well as placement of the knee in a slightly flexed and valgus position. In addition, the nail does not migrate and it may be used even when there is a standard-size prosthesis in the ipsilateral hip.
在33例患者(33个膝关节)的非限制性全膝关节置换失败后,采用短Huckstep钉进行了膝关节融合术。膝关节融合术的指征为31个膝关节感染和2个夏科关节。3个膝关节曾尝试使用外固定进行融合术但失败。Huckstep钉经膝关节逆行插入股骨,然后顺行插入胫骨。手术时间平均为104分钟(范围65至155分钟)。所有膝关节均使用了局部骨移植。随访时,平均47个月(范围18至94个月),30个膝关节(91%)有影像学愈合证据。融合术后平均愈合时间为5.2个月(范围2至10个月)。8个有严重脓性感染的膝关节先进行清创,随后作为二期手术进行膝关节融合术;其他膝关节则进行一期膝关节融合术。在融合术前曾感染的31个膝关节中,只有1个在融合术后复发。采用短Huckstep钉进行膝关节融合术可立即提供轴向和旋转稳定性,无需外部支撑即可负重,并可将膝关节置于轻度屈曲和外翻位置。此外,该钉不会移位,即使同侧髋关节有标准尺寸的假体时也可使用。