Suppr超能文献

染料掺入以增强标准模量和低模量骨水泥的激光消融。

Dye incorporation to enhance the laser ablation of standard and reduced-modulus bone cements.

作者信息

Lee C L, Litsky A S, Roberts C J

机构信息

Biomedical Engineering Center and Orthopaedic BioMaterials Laboratory, Ohio State University, Columbus 43210, USA.

出版信息

J Orthop Res. 1998 Jan;16(1):70-5. doi: 10.1002/jor.1100160112.

Abstract

Laser ablation of acrylic bone cement is an alternative method of cement removal that can be used during revision arthroplasty of cemented implants. This study investigated the feasibility of using a continuous-wave Argon ion laser (wavelength = 514 nm) with the addition of methylene blue or red dye no. 13 to enhance the ablation of two types of bone cements: polymethylmethacrylate and polybutylmethylmethacrylate. Six cement/dye combinations were studied while power (0.5, 0.75, and 1.0 W) and exposure times (30, 45, 60, and 90 seconds) were varied. The Argon laser was unable to ablate undyed polymethylmethacrylate or polybutylmethylmethacrylate. However, ablation was shown for both cements with either dye. The red dye had a stronger absorption peak at 514 nm than did the blue dye. Statistically larger ablation areas were seen for red polymethylmethacrylate than for blue polymethylmethacrylate (p < 0.013) at all levels tested. Ablation areas were larger in red than in blue polybutylmethylmethacrylate cement. Blue polybutylmethylmethacrylate cement produced larger ablation areas than did blue polymethylmethacrylate cements at all energy levels tested, with smaller surrounding damage areas. Red polybutylmethylmethacrylate cement also produced larger ablation areas than did red polymethylmethacrylate cement (at 0.75 and 1.0 W), again with smaller damage areas. Damage zones were smallest in red polybutylmethylmethacrylate cements at all test levels. These results suggest that, by using dyes to selectively alter the absorption characteristics of bone cement, laser ablation can be an effective method for cement removal. Changes in the chemical structure of the cement can also influence the response to laser treatment. Furthermore, the absorption spectra of the bone cement can be altered to maximize energy absorption at a wavelength that is not absorbed by bone tissue; this potentially minimizes damage to bone during revision surgery.

摘要

激光消融丙烯酸骨水泥是一种在骨水泥型植入物翻修关节成形术期间可用于去除骨水泥的替代方法。本研究调查了使用连续波氩离子激光(波长 = 514 nm)并添加亚甲蓝或13号红色染料以增强对两种骨水泥(聚甲基丙烯酸甲酯和聚丁基甲基丙烯酸甲酯)消融效果的可行性。研究了六种骨水泥/染料组合,同时改变功率(0.5、0.75和1.0 W)和照射时间(30、45、60和90秒)。氩激光无法消融未染色的聚甲基丙烯酸甲酯或聚丁基甲基丙烯酸甲酯。然而,两种骨水泥与任何一种染料结合时均显示出消融效果。红色染料在514 nm处的吸收峰比蓝色染料更强。在所有测试水平下,红色聚甲基丙烯酸甲酯的消融面积在统计学上均大于蓝色聚甲基丙烯酸甲酯(p < 0.013)。红色聚丁基甲基丙烯酸甲酯骨水泥的消融面积大于蓝色聚丁基甲基丙烯酸甲酯骨水泥。在所有测试能量水平下,蓝色聚丁基甲基丙烯酸甲酯骨水泥产生的消融面积均大于蓝色聚甲基丙烯酸甲酯骨水泥,且周围损伤面积较小。红色聚丁基甲基丙烯酸甲酯骨水泥在0.75和1.0 W时产生的消融面积也大于红色聚甲基丙烯酸甲酯骨水泥,同样损伤面积较小。在所有测试水平下,红色聚丁基甲基丙烯酸甲酯骨水泥的损伤区域最小。这些结果表明,通过使用染料选择性改变骨水泥的吸收特性,激光消融可以成为一种有效的骨水泥去除方法。骨水泥化学结构的变化也会影响对激光治疗的反应。此外,可以改变骨水泥的吸收光谱,以在骨组织不吸收的波长处使能量吸收最大化;这有可能在翻修手术期间将对骨的损伤降至最低。

文献检索

告别复杂PubMed语法,用中文像聊天一样搜索,搜遍4000万医学文献。AI智能推荐,让科研检索更轻松。

立即免费搜索

文件翻译

保留排版,准确专业,支持PDF/Word/PPT等文件格式,支持 12+语言互译。

免费翻译文档

深度研究

AI帮你快速写综述,25分钟生成高质量综述,智能提取关键信息,辅助科研写作。

立即免费体验