Rogalla P, Werner-Rustner M, Huitema A, van Est A, Meiri N, Hamm B
Department of Radiology, Charité Hospital, Humboldt-Universität zu Berlin, Schumannstrasse 20/21, D-10098 Berlin, Germany.
Eur Radiol. 1998;8(4):563-7. doi: 10.1007/s003300050434.
The purpose of this study was to determine the optimal scanning technique for lesion detection in a small bowel phantom and to evaluate the virtual endoscopy (VE) technique in patients. A small bowel phantom with a fold thickness of 7 mm and length of 115 cm was prepared with nine round lesions (3 x 1 mm, 2 x 2 mm, 2 x 3 mm, 2 x 4 mm). Spiral CT parameters were 7/7/4, 3/5/2, 3/5/1, 1.5/3/1 (slice thickness/table feed/reconstruction interval). VE was done using volume rendering technique with 1 cm distance between images and 120 degrees viewing angle. Two masked readers were asked to determine the number and location of the lesions. Seven patients underwent an abdominal CT during one breathhold after placement of a duodenal tube and filling of the small bowel with methyl cellulose contrast solution. VE images were compared with the axial slices with respect to detectability of pathology. With the 7/7/4 protocol only the 4-mm lesions were visualised with fuzzy contours. The 3/5/2 protocol showed both 4-mm lesions, one 3-mm lesion and one false positive lesion. The 3/5/1 protocol showed both 4-mm and both 3-mm (one uncertain) lesions with improved sharpness, and no false positive lesions. One 2-mm and one 1-mm lesion were additionally seen with the 1.5/3/1 protocol. Path definition was difficult in sharp turns or kinks in the lumen. In all patients, no difference was found between VE and axial slices for bowel pathology; however, axial slices showed 'outside' information that was not included in VE. We conclude that the 3/5/2 protocol may be regarded as an optimal compromise between lesion detection, coverage during one breathhold, and number of reconstructed images in patients; round lesions of 4 mm in diameter can be detected with high certainty.
本研究的目的是确定在小肠模型中进行病变检测的最佳扫描技术,并评估患者的虚拟内镜(VE)技术。制备了一个褶皱厚度为7毫米、长度为115厘米的小肠模型,其中有九个圆形病变(3×1毫米、2×2毫米、2×3毫米、2×4毫米)。螺旋CT参数为7/7/4、3/5/2、3/5/1、1.5/3/1(层厚/床速/重建间隔)。使用容积再现技术进行VE,图像间距为1厘米,视角为120度。两名盲法阅片者被要求确定病变的数量和位置。七名患者在放置十二指肠管并用甲基纤维素造影剂充盈小肠后,在一次屏气期间进行腹部CT检查。将VE图像与轴位图像在病变可检测性方面进行比较。采用7/