[An osseointegrated micromanipulator as anchor for implantable hearing aid transducers. 1: Fitting to the surgical anatomy of the temporal bone and surgical technical properties].

The first electronic implantable hearing aids for patients with hearing loss are coupled to the ossicular chain or perilymph during implantation and are now available. Our new Tübingen implant designed for sensorineural hearing loss (SNHL) is the combination of an implantable microphone and piezotransducer. To avoid hearing losses during implantation, the Tübingen piezotransducer will be (1) fixed to the mastoid cavity and (2) positioned to one of the ossicular target points. This can be done with a micromanipulator which will be implanted together with transducer and microphone in the mastoid cavity. The manipulator weights 0.7 g. With four degrees of freedom, it allows highly secure and safe positioning of the transducer's probe tip to the ossicular chain under close to stereotactic conditions. The main advantages of the present micromanipulator are (1) easy handling during surgery, (2) the transducer's precise positioning to the ossicular target point with sufficient degrees of freedom, and (3) the transducer's stable fixation in the mastoid cavity in the final position. Following integrated safety as the leading principle, ossicular or inner ear injuries caused, e.g., by the patient's head movement or unintentional manual contact by the surgeon, are minimized. The micromanipulator is, as it were, the surgeon's vibration-free "artificial hand". The manipulator's development and its optimization to the mastoid cavity by test implantation in 50 human temporal bones are shown in detail. While coupling the transducer to the body of the incus, transducer, microphone, and micromanipulator can be implanted into 76% of all mastoid cavities without protrusion. In the case of transducers coupling to the long process of the incus, the protrusion-free implantation rate of the above-mentioned three implant modules is 78%.