Ohkoshi Y, Inoue C, Yamane S, Hashimoto T, Ishida R
Department of Orthopedic Surgery, Hakodate Central General Hospital, Hakodate City, Japan.
Arthroscopy. 1998 Sep;14(6):580-4. doi: 10.1016/s0749-8063(98)70053-2.
A prospective study was conducted of how the muscle strength of the donor knee is affected by harvesting of the autogenous semitendinosus tendon (St) for use as a substitute graft material in cruciate ligament reconstruction. There were 25 patients from whom only the St was harvested from the contralateral (i.e., healthy/donor) knee. Using a Biodex System II (Biodex, New York, NY), the strength of the donor knee was measured during both extension and flexion, both before and 12 months after the tendon harvesting procedure. A comparative study was made of the preharvest and postharvest values for the peak torque and peak torque angle in the isokinetic contraction. There were no statistically significant differences between the preharvest and postharvest peak torque values of the donor knee. However, the peak torque angle decreased significantly after the tendon harvest; the range of the mean decrease was from 11.7 degrees to 15.0 degrees. This indicates that there was a change to a small flexion angle (P < .05). After the tendon harvest, regardless of the applied angular velocity, more than 80% of the cases showed a change of torque curve shape in which there was no peak in the latter half, and the position of the peak was shifted to the left. In conclusion, the results of this study indicate that harvesting of the autogenous St does not affect the peak torque, but the peak torque angle during flexion of the donor knee is reduced.
开展了一项前瞻性研究,以探讨在交叉韧带重建中采集自体半腱肌肌腱(St)用作替代移植材料时,供体膝关节的肌肉力量会受到怎样的影响。有25例患者,仅从对侧(即健康/供体)膝关节采集了St。使用Biodex System II(Biodex,纽约州纽约市),在肌腱采集手术前和术后12个月,分别在伸展和屈曲过程中测量供体膝关节的力量。对等速收缩中的峰值扭矩和峰值扭矩角度的采集前和采集后值进行了比较研究。供体膝关节的采集前和采集后峰值扭矩值之间无统计学显著差异。然而,肌腱采集后峰值扭矩角度显著降低;平均降低范围为11.7度至15.0度。这表明出现了向小屈曲角度的变化(P < 0.05)。肌腱采集后,无论施加的角速度如何,超过80%的病例显示扭矩曲线形状发生变化,后半部分没有峰值,且峰值位置向左移动。总之,本研究结果表明,采集自体St不影响峰值扭矩,但供体膝关节屈曲时的峰值扭矩角度会降低。