Marginal leakage in class II-restorations after use of ceramic-inserts luted with different materials.

The efficiency of using prefabricated ceramic inlays to prevent microleakage has been discussed in different investigations. The purpose of this study was to evaluate the marginal microleakage of a new glass ceramic inlay system in combination with two different composite luting materials and one polyacid-modified composite, respectively. Standardized class II cavities (n = 60) were filled with (1) Empress inlays fixed with a highly viscous luting composite as a control group, and with glass ceramic inlays (Cerana) in combination with (2) a highly viscous luting composite, (3) a low-viscous luting composite and (4) a polyacid-modified composite, respectively. After thermocycling the marginal quality was analysed with scanning electron microscopy, and the dye penetration along the cavity walls was measured. The use of the Cerana inlays with a polyacid-modified composite resin did not reveal a good marginal adaptation. However, the combination of the Cerana and the Empress inlays with the highly viscous composite exhibited a comparable marginal fit. Within the limitations of an in vitro study it is concluded that the combination of the new glass ceramic inlays with a polyacid-modified composite cannot be recommended for clinical use.