Gouin F, Nava G, Pedrant G
Ann Anesthesiol Fr. 1975;16 Spec No 2-3:141-51.
Qs/Qt is usually determined by the "oxygen" method. The standard equation for calculation of percentage shunts is therefore: (see article) In the case for an FiO2 of I and when PaO2 is greater than 150 mm Hg, the equation can be expressed in terms of the difference in partial pressures of oxygen between the alveolus and the artery: (see article) The determination of Qs/Qt then necessitates, apart from calculation of PaO2 measurement of the O2 content of mixed venous blood, taken from the pulmonary artery. When an indwelling catheter for the sampling of mixed venous blood is not available, samples of superior vena cava blood can be used instead. The error thereby introduced into the calculation of Qs/Qt is debatable. Strictly, only the sampling of mixed venous blood permits precise determination of Qs/Qt. As long as the variations in Qs/Qt, more than its real value at a give time, are worth supervising, superior vena cava blood gives a rather satisfactory approximation. Various graphs relating Qs/Qt to PaO2 or to the alveolo-arterial difference have been proposed and are discussed. The other methods of determining Qs/Qt are also looked at. The value of determination of the shunt during non-hemodynamic edema, and especially in the patient under artificial ventilation with P.E.E.P., is emphasised.
分流率(Qs/Qt)通常通过“氧”法测定。因此,计算分流百分比的标准公式为:(见文章)当吸入氧分数(FiO2)为1且动脉血氧分压(PaO2)大于150mmHg时,该公式可以用肺泡与动脉之间氧分压的差值来表示:(见文章)除了计算PaO2外,测定Qs/Qt还需要测量从肺动脉采集的混合静脉血的氧含量。当没有用于采集混合静脉血的留置导管时,可以使用上腔静脉血样代替。由此引入到Qs/Qt计算中的误差存在争议。严格来说,只有采集混合静脉血才能精确测定Qs/Qt。只要Qs/Qt的变化(超过其在某一时刻的实际值)值得监测,上腔静脉血就能给出相当令人满意的近似值。已经提出并讨论了各种将Qs/Qt与PaO2或肺泡-动脉氧分压差相关联的图表。还探讨了其他测定Qs/Qt的方法。强调了在非血流动力学性水肿期间,尤其是在接受呼气末正压通气(PEEP)的人工通气患者中测定分流的价值。