Suppr超能文献

水溶液中材料的超临界流体处理:SEDS在乳糖作为模型物质方面的应用。

Supercritical fluid processing of materials from aqueous solutions: the application of SEDS to lactose as a model substance.

作者信息

Palakodaty S, York P, Pritchard J

机构信息

Postgraduate Studies in Pharmaceutical Technology, School of Pharmacy, University of Bradford, UK.

出版信息

Pharm Res. 1998 Dec;15(12):1835-43. doi: 10.1023/a:1011949805156.

Abstract

PURPOSE

The objective of the work was to study the factors influencing the crystallisation of alpha-lactose monohydrate from aqueous solution using the Solution Enhanced Dispersion by Supercritical Fluids (SEDS) technique.

METHODS

An aqueous solution of alpha-lactose monohydrate is dispersed with a homogeneous mixture of carbon dioxide-ethanol/methanol using a co-axial nozzle. Crystallised lactose particles were analysed for water content by Karl-Fisher analysis, anomeric composition by Differential Scanning Calorimetry (DSC) and characterised for crystallinity by powder X-ray diffraction and morphology by scanning electron microscopy.

RESULTS

Water content in the lactose recrystallised with ethanol was higher compared to the product obtained with methanol as cosolvent. Rate of crystallisation could be altered by varying the CO2 flow thereby modifying the water content in the lactose. At low flow rates of CO2, the crystallisation occurred in a cosolvent rich antisolvent phase causing rapid crystallisation whereas high flow rates of CO2 favoured a much slower crystallisation mechanism in the water rich phase. As a consequence, the morphology changed from thin long bands to large agglomerated chunks with mean particle size between 5 and 31 microns.

CONCLUSIONS

The SEDS process is an efficient method for forming micron sized particles of water-soluble compounds with controlled physico-chemical properties.

摘要

目的

本研究的目的是利用超临界流体溶液增强分散技术(SEDS),研究影响α-乳糖一水合物从水溶液中结晶的因素。

方法

使用同轴喷嘴将α-乳糖一水合物的水溶液与二氧化碳-乙醇/甲醇的均匀混合物进行分散。通过卡尔费休分析法分析结晶乳糖颗粒的含水量,通过差示扫描量热法(DSC)分析异头物组成,并通过粉末X射线衍射表征结晶度,通过扫描电子显微镜表征形态。

结果

与以甲醇作为共溶剂获得的产物相比,用乙醇重结晶的乳糖中的含水量更高。通过改变二氧化碳流速从而改变乳糖中的含水量,可以改变结晶速率。在低二氧化碳流速下,结晶发生在富含共溶剂的反溶剂相中,导致快速结晶,而高二氧化碳流速有利于在富水相中形成慢得多的结晶机制。结果,形态从细长条带变为平均粒径在5至31微米之间的大团聚块。

结论

SEDS工艺是一种形成具有可控物理化学性质的微米级水溶性化合物颗粒的有效方法。

文献AI研究员

20分钟写一篇综述,助力文献阅读效率提升50倍。

立即体验

用中文搜PubMed

大模型驱动的PubMed中文搜索引擎

马上搜索

文档翻译

学术文献翻译模型,支持多种主流文档格式。

立即体验