Suppr超能文献

评估BBL MGIT(分枝杆菌生长指示管)AST SIRE系统对结核分枝杆菌进行4种一线抗结核药物药敏试验的情况。

Evaluation of the BBL MGIT (Mycobacterial growth indicator tube) AST SIRE system for antimycobacterial susceptibility testing of Mycobacterium tuberculosis to 4 primary antituberculous drugs.

作者信息

Bergmann J S, Fish G, Woods G L

机构信息

Department of Pathology, University of Texas Medical Branch, Galveston, TX 77555-0740, USA.

出版信息

Arch Pathol Lab Med. 2000 Jan;124(1):82-6. doi: 10.5858/2000-124-0082-EOTBMM.

Abstract

OBJECTIVE

To evaluate the performance of the BBL MGIT (Mycobacterial Growth Indicator Tube) AST SIRE system for the antimycobacterial susceptibility testing of Mycobacterium tuberculosis to isoniazid (at a concentration equivalent to the lower concentration used for testing by the method of proportion), rifampin, ethambutol, and streptomycin.

DESIGN

Thirty-one clinical isolates and 30 challenge strains provided by the Centers for Disease Control and Prevention (CDC) were tested by MGIT AST SIRE using 2 methods of inoculum preparation, and results were compared with those of the method of proportion, which was considered the reference method. Clinical isolates for which the results of the 2 methods were discordant also were tested at 2 reference laboratories.

RESULTS

Based on data from our site and the reference laboratories, agreement rates between initial MGIT AST SIRE results and the method of proportion for the clinical isolates with the inoculum prepared from a McFarland equivalent and from a positive MGIT tube, respectively, were 100% and 96.8% for isoniazid, 100% and 100% for rifampin, 96.8% and 100% for ethambutol, and 100% and 100% for streptomycin, excluding the isolate for which the discordant streptomycin result could not be resolved. For the 30 challenge isolates, agreement rates between MGIT AST SIRE and expected results and between method of proportion and expected results, respectively, were 96.7% and 93.3% for isoniazid, 93.3% and 100% for rifampin, 83. 3% and 100% for ethambutol, and 93.3% and 100% for streptomycin. For the clinical isolates, the mean time to an MGIT AST SIRE result of susceptible was 6.15 +/- 0.13 days (range, 5-8 days). For a result of resistant, the mean time overall was 5.00 +/- 0.24 days (range, 3-8 days).

CONCLUSION

These data suggest that the MGIT AST SIRE system, using either method of inoculum preparation, is an acceptable alternative to the BACTEC 460 TB method of susceptibility testing of clinical isolates of M tuberculosis to isoniazid, rifampin, ethambutol, and streptomycin. Reasons for the lower agreement with the CDC challenge isolates should be investigated. Further evaluation of the MGIT AST SIRE system using a concentration of isoniazid equivalent to the higher concentration tested by the method of proportion would be useful, because the decision concerning use of this agent generally is based on the susceptibility test result at the higher concentration.

摘要

目的

评估BBL MGIT(分枝杆菌生长指示管)AST SIRE系统对结核分枝杆菌进行异烟肼(浓度相当于比例法检测所用的较低浓度)、利福平、乙胺丁醇和链霉素药敏试验的性能。

设计

使用MGIT AST SIRE通过2种接种物制备方法对疾病控制与预防中心(CDC)提供的31株临床分离株和30株挑战菌株进行检测,并将结果与被视为参考方法的比例法结果进行比较。对2种方法结果不一致的临床分离株也在2个参考实验室进行检测。

结果

根据我们实验室和参考实验室的数据,对于临床分离株,分别用麦氏浊度相当物和阳性MGIT管制备接种物时,MGIT AST SIRE初始结果与比例法结果的一致率,异烟肼分别为100%和96.8%,利福平为100%和100%,乙胺丁醇为96.8%和100%,链霉素为100%和100%(不包括链霉素结果不一致且无法解决的分离株)。对于30株挑战分离株,MGIT AST SIRE与预期结果之间以及比例法与预期结果之间的一致率,异烟肼分别为96.7%和93.3%,利福平为93.3%和100%,乙胺丁醇为83.3%和100%,链霉素为93.3%和100%。对于临床分离株,MGIT AST SIRE得出敏感结果的平均时间为6.15±0.13天(范围5 - 8天)。得出耐药结果的总体平均时间为5.00±0.24天(范围3 - 8天)。

结论

这些数据表明,使用任何一种接种物制备方法的MGIT AST SIRE系统,都是对结核分枝杆菌临床分离株进行异烟肼、利福平、乙胺丁醇和链霉素药敏试验的可接受替代方法,替代BACTEC 460 TB法。应调查与CDC挑战分离株一致率较低的原因。使用与比例法检测所用较高浓度相当的异烟肼浓度对MGIT AST SIRE系统进行进一步评估将是有用的,因为关于该药物使用的决策通常基于较高浓度时的药敏试验结果。

文献AI研究员

20分钟写一篇综述,助力文献阅读效率提升50倍。

立即体验

用中文搜PubMed

大模型驱动的PubMed中文搜索引擎

马上搜索

文档翻译

学术文献翻译模型,支持多种主流文档格式。

立即体验