Dewaraja Y K, Ljungberg M, Koral K F
Internal Medicine Department, The University of Michigan Medical Center, Ann Arbor 48109-0552, USA.
J Nucl Med. 2000 Jan;41(1):123-30.
In 131I SPECT, image quality and quantification accuracy are degraded by object scatter as well as scatter and penetration in the collimator. The characterization of energy and spatial distributions of scatter and penetration performed in this study by Monte Carlo simulation will be useful for the development and evaluation of techniques that compensate for such events in 131I imaging.
First, to test the accuracy of the Monte Carlo model, simulated and measured data were compared for both a point source and a phantom. Next, simulations to investigate scatter and penetration were performed for four geometries: point source in air, point source in a water-filled cylinder, hot sphere in a cylinder filled with nonradioactive water, and hot sphere in a cylinder filled with radioactive water. Energy spectra were separated according to order of scatter, type of interaction, and gamma-ray emission energy. A preliminary evaluation of the triple-energy window (TEW) scatter correction method was performed.
The accuracy of the Monte Carlo model was verified by the good agreement between measured and simulated energy spectra and radial point spread functions. For a point source in air, simulations show that 73% of events in the photopeak window had either scattered in or penetrated the collimator, indicating the significance of collimator interactions. For a point source in a water-filled phantom, the separated energy spectra showed that a 20% photopeak window can be used to eliminate events that scatter more than two times in the phantom. For the hot sphere phantoms, it was shown that in the photopeak region the spectrum shape of penetration events is very similar to that of primary (no scatter and no penetration) events. For the hot sphere regions of interest, the percentage difference between true scatter counts and the TEW estimate of scatter counts was <12%.
In 131I SPECT, object scatter as well as collimator scatter and penetration are significant. The TEW method provides a reasonable correction for scatter, but the similarity between the 364-keV primary and penetration energy spectra makes it difficult to compensate for these penetration events using techniques that are based on spectral analysis.
在131I单光子发射计算机断层显像(SPECT)中,物体散射以及准直器中的散射和穿透会降低图像质量和定量准确性。本研究通过蒙特卡罗模拟对散射和穿透的能量及空间分布进行的表征,将有助于开发和评估补偿131I成像中此类事件的技术。
首先,为测试蒙特卡罗模型的准确性,将点源和体模的模拟数据与测量数据进行比较。接下来,针对四种几何结构进行散射和穿透研究的模拟:空气中的点源、充满水的圆柱体中的点源、充满非放射性水的圆柱体中的热球以及充满放射性水的圆柱体中的热球。根据散射顺序、相互作用类型和伽马射线发射能量对能谱进行分离。对三能量窗(TEW)散射校正方法进行了初步评估。
测量和模拟的能谱以及径向点扩展函数之间的良好一致性验证了蒙特卡罗模型的准确性。对于空气中的点源,模拟表明光电峰窗内73%的事件在准直器中发生了散射或穿透,表明准直器相互作用的重要性。对于充满水体模中的点源,分离后的能谱表明,20%的光电峰窗可用于消除在体模中散射超过两次的事件。对于热球体模,结果表明在光电峰区域,穿透事件的能谱形状与初级(无散射和无穿透)事件的能谱形状非常相似。对于热球感兴趣区域,真实散射计数与TEW散射计数估计值之间的百分比差异<12%。
在131I SPECT中,物体散射以及准直器散射和穿透很显著。TEW方法对散射提供了合理的校正,但364 keV初级能谱和穿透能谱之间的相似性使得难以使用基于能谱分析的技术来补偿这些穿透事件。