Mesiano A J, Beckman E J, Russell A J
Department of Chemical Engineering, University of Pittsburgh, Pittsburgh Pennsylvania 15261, USA.
Biotechnol Prog. 2000 Jan-Feb;16(1):64-8. doi: 10.1021/bp990138p.
The biocatalytic synthesis of fluorinated polyesters from activated diesters and fluorinated diols has been investigated. The effects of time, continuous enzyme addition, enzyme concentration, and diol chain length were studied to determine the factors that would limit chain extension, such as enzyme inactivation, enzyme specificity, the equilibrium position for the reaction, hydrolytic side reactions, and polymer precipitation. An enzyme screen demonstrated that only Novozym 435, an immobilized lipase from Candida antarctica, was effective in producing the fluorinated polyester. Molecular weight and polydispersity analyses were performed by means of gel permeation chromatography. End group analysis was accomplished through the use of matrix-assisted laser desorption/ionization time-of-flight mass spectroscopy. Polymer molecular weight steadily increased and then leveled off after approximately 30 h, with a weight average molecular weight of approximately 1773. The majority of the polymer chains were terminated with either hydroxyl or vinyl groups. Polymers that were synthesized from bulk monomers had higher molecular weights, but high enzyme concentrations were required. Enzyme specificity toward shorter chain fluorinated diols appeared to be the governing factor in limiting chain growth. However, polymer molecular weight increased further (M(w) = 8094) when a fluorinated diol that contained an additional methylene spacer between the fluorine atoms and hydroxyl groups was used.
对由活性二酯和含氟二醇生物催化合成含氟聚酯进行了研究。研究了时间、连续添加酶、酶浓度和二醇链长的影响,以确定限制链增长的因素,如酶失活、酶特异性、反应的平衡位置、水解副反应和聚合物沉淀。酶筛选表明,只有来自南极假丝酵母的固定化脂肪酶诺维信435能有效生产含氟聚酯。通过凝胶渗透色谱法进行分子量和多分散性分析。通过基质辅助激光解吸/电离飞行时间质谱法完成端基分析。聚合物分子量在约30小时后稳步增加,然后趋于平稳,重均分子量约为1773。大多数聚合物链以羟基或乙烯基封端。由本体单体合成的聚合物分子量较高,但需要高酶浓度。酶对较短链含氟二醇的特异性似乎是限制链增长的主要因素。然而,当使用在氟原子和羟基之间含有额外亚甲基间隔基的含氟二醇时,聚合物分子量进一步增加(M(w)=8094)。