Meeks S L, Bova F J, Wagner T H, Buatti J M, Friedman W A, Foote K D
Division of Radiation Oncology, University of Iowa College of Medicine, Iowa City, IA 52242, USA.
Int J Radiat Oncol Biol Phys. 2000 Mar 15;46(5):1291-9. doi: 10.1016/s0360-3016(99)00536-2.
Infrared light-emitting diodes (IRLEDs) have been used for optic-guided stereotactic radiotherapy localization at the University of Florida since 1995. The current paradigm requires stereotactic head ring placement for the patient's first fraction. The stereotactic coordinates and treatment plan are determined relative to this head ring. The IRLEDs are attached to the patient via a maxillary bite plate, and the position of the IRLEDs relative to linac isocenter is saved to file. These positions are then recalled for each subsequent treatment to position the patient for fractionated therapy. The purpose of this article was to report a method of predicting the desired IRLED locations without need for the invasive head ring.
To achieve the goal of frameless optic-guided radiotherapy, a method is required for direct localization of the IRLED positions from a CT scan. Because it is difficult to localize the exact point of light emission from a CT scan of an IRLED, a new bite plate was designed that contains eight aluminum fiducial markers along with the six IRLEDs. After a calibration procedure to establish the spatial relationship of the IRLEDs to the aluminum fiducial markers, the stereotactic coordinates of the IRLED light emission points are determined by localizing the aluminum fiducial markers in a stereotactic CT scan.
To test the accuracy of direct CT determination of the IRLED positions, phantom tests were performed. The average accuracy of isocenter localization using the IRLED bite plate was 0.65 +/- 0. 17 mm for these phantom tests. In addition, the optic-guided system has a unique compatibility with the stereotactic head ring. Therefore, the isocentric localization capability was clinically tested using the stereotactic head ring as the absolute standard. The ongoing clinical trial has shown the frameless system to provide a patient localization accuracy of 1.11 +/- 0.3 mm compared with the head ring.
Optic-guided radiotherapy using IRLEDs provides a mechanism through which setup accuracy may be improved over conventional techniques. To date, this optic-guided therapy has been used only as a hybrid system that requires use of the stereotactic head ring for the first fraction. This has limited its use in the routine clinical setting. Computation of the desired IRLED positions eliminates the need for the invasive head ring for the first fraction. This allows application of optic-guided therapy to a larger cohort of patients, and also facilitates the initiation of extracranial optic-guided radiotherapy.
自1995年以来,佛罗里达大学一直使用红外发光二极管(IRLED)进行光学引导的立体定向放射治疗定位。目前的模式要求在患者首次治疗时放置立体定向头环。立体定向坐标和治疗计划是相对于这个头环确定的。IRLED通过上颌咬板固定在患者身上,IRLED相对于直线加速器等中心的位置被保存到文件中。然后在每次后续治疗时调用这些位置,以便为分次治疗对患者进行定位。本文的目的是报告一种无需侵入性头环即可预测所需IRLED位置的方法。
为实现无框架光学引导放射治疗的目标,需要一种从CT扫描直接定位IRLED位置的方法。由于从IRLED的CT扫描中难以定位光发射的确切点,因此设计了一种新的咬板,它包含八个铝基准标记以及六个IRLED。在进行校准程序以建立IRLED与铝基准标记的空间关系后,通过在立体定向CT扫描中定位铝基准标记来确定IRLED发光点的立体定向坐标。
为测试直接通过CT确定IRLED位置的准确性,进行了体模测试。对于这些体模测试,使用IRLED咬板进行等中心定位的平均准确性为0.65±0.17毫米。此外,光学引导系统与立体定向头环具有独特的兼容性。因此,以立体定向头环作为绝对标准对等中心定位能力进行了临床测试。正在进行的临床试验表明,与头环相比,无框架系统可提供1.11±0.3毫米的患者定位准确性。
使用IRLED的光学引导放射治疗提供了一种机制,通过该机制可以比传统技术提高设置准确性。迄今为止,这种光学引导治疗仅作为一种混合系统使用,该系统在首次治疗时需要使用立体定向头环。这限制了它在常规临床环境中的应用。计算所需的IRLED位置消除了首次治疗时使用侵入性头环的需要。这使得光学引导治疗能够应用于更多患者,也便于启动颅外光学引导放射治疗。