Bova F J, Buatti J M, Friedman W A, Mendenhall W M, Yang C C, Liu C
Department of Radiation Oncology, University of Florida Health Science Center, Gainesville 32610-0385, USA.
Int J Radiat Oncol Biol Phys. 1997 Jul 1;38(4):875-82. doi: 10.1016/s0360-3016(97)00055-2.
To develop and test a system for high precision fractionated stereotactic radiotherapy that separates immobilization and localization devices.
Patient localization is achieved through detection and digital registration of an independent bite plate system. The bite plate is made and linked to a set of six infrared light emitting diodes (IRLEDs). These IRLEDs are detected by an infrared camera system that identifies the position of each IRLED within 0.1 to 0.15 mm. Calibration of the camera system defines isocenter and translational X, Y, and Z axes of the stereotactic radiosurgery subsystem and thereby digitally defines the virtual treatment room space in a computer linked to the camera system. Positions of the bite plate's IRLEDs are processed digitally using a computer algorithm so that positional differences between an actual bite plate position and a desired position can be resolved within 0.1 mm of translation (X, Y, and Z distance) and 0.1 degree of rotation. Furthermore, bite plate misalignment can be displayed digitally in real time with translational (x, y, and z) and rotational (roll, pitch, and yaw) parameters for an actual bite plate position. Immobilization is achieved by a custom head mold and thermal plastic mask linked by hook-and-loop fastener tape. The head holder system permits rotational and translational movements for daily treatment positioning based on the bite plate localization system. Initial testing of the localization system was performed on 20 patients treated with radiosurgery. The system was used to treat 11 patients with fractionated stereotactic radiotherapy.
Assessment of bite plate localization in radiosurgery patients revealed that the patient's bite plate could be positioned and repositioned within 0.5 +/- 0.3 mm (standard deviation). After adjustments, the first 11 patients were treated with the bite plate repositioning error reduced to 0.2 +/- 0.1 mm.
High precision stereotactic radiotherapy can be delivered using separate localization and immobilization systems. Treatment setup and delivery can be accomplished in 15 min or less. Advantages compared with standard systems require further study.
开发并测试一种用于高精度分次立体定向放射治疗的系统,该系统将固定装置和定位装置分开。
通过独立咬板系统的检测和数字配准实现患者定位。制作咬板并将其与一组六个红外发光二极管(IRLED)相连。这些IRLED由红外摄像机系统检测,该系统可在0.1至0.15毫米范围内识别每个IRLED的位置。摄像机系统的校准确定了立体定向放射外科子系统的等中心以及平移X、Y和Z轴,从而在与摄像机系统相连的计算机中以数字方式定义虚拟治疗室空间。咬板的IRLED位置使用计算机算法进行数字处理,以便实际咬板位置与期望位置之间的位置差异在平移(X、Y和Z距离)0.1毫米和旋转0.1度范围内得到解决。此外,咬板的未对准情况可以通过实际咬板位置的平移(x、y和z)和旋转(滚动、俯仰和偏航)参数实时数字显示。通过定制的头模和通过钩环带连接的热塑性面罩实现固定。头架系统允许基于咬板定位系统进行日常治疗定位的旋转和平移运动。对20例接受放射外科治疗的患者进行了定位系统的初步测试。该系统用于治疗11例接受分次立体定向放射治疗的患者。
对放射外科患者咬板定位的评估显示,患者的咬板可以在0.5±0.3毫米(标准差)范围内定位和重新定位。调整后,前11例患者在咬板重新定位误差降至0.2±0.1毫米的情况下接受治疗。
使用单独的定位和固定系统可以实现高精度立体定向放射治疗。治疗设置和实施可在15分钟或更短时间内完成。与标准系统相比的优势需要进一步研究。