Needs E C, Capellas M, Bland A P, Manoj P, MacDougal D, Paul G
Institute of Food Research, Reading Laboratory, Earley Gate, UK.
J Dairy Res. 2000 Aug;67(3):329-48. doi: 10.1017/s0022029900004301.
Heat (85 degrees C for 20 min) and pressure (600 MPa for 15 min) treatments were applied to skim milk fortified by addition of whey protein concentrate. Both treatments caused > 90 % denaturation of beta-lactoglobulin. During heat treatment this denaturation took place in the presence of intact casein micelles; during pressure treatment it occurred while the micelles were in a highly dissociated state. As a result micelle structure and the distribution of beta-lactoglobulin were different in the two milks. Electron microscopy and immunolabelling techniques were used to examine the milks after processing and during their transition to yogurt gels. The disruption of micelles by high pressure caused a significant change in the appearance of the milk which was quantified by measurement of the colour values L*, a* and b*. Heat treatment also affected these characteristics. Casein micelles are dynamic structures, influenced by changes to their environment. This was clearly demonstrated by the transition from the clusters of small irregularly shaped micelle fragments present in cold pressure-treated milk to round, separate and compact micelles formed on warming the milk to 43 degrees C. The effect of this transition was observed as significant changes in the colour indicators. During yogurt gel formation, further changes in micelle structure, occurring in both pressure and heat-treated samples, resulted in a convergence of colour values. However, the microstructure of the gels and their rheological properties were very different. Pressure-treated milk yogurt had a much higher storage modulus but yielded more readily to large deformation than the heated milk yogurt. These changes in micelle structure during processing and yogurt preparation are discussed in terms of a recently published micelle model.
对添加了乳清蛋白浓缩物的脱脂奶进行了加热(85摄氏度,20分钟)和加压(600兆帕,15分钟)处理。两种处理均导致β-乳球蛋白变性超过90%。在热处理过程中,这种变性发生在完整酪蛋白胶束存在的情况下;在压力处理过程中,变性发生在胶束处于高度解离状态时。结果,两种牛奶中的胶束结构和β-乳球蛋白的分布不同。电子显微镜和免疫标记技术用于检查处理后的牛奶以及它们向酸奶凝胶转变过程中的牛奶。高压导致的胶束破坏使牛奶外观发生了显著变化,通过测量颜色值L*、a和b进行了量化。热处理也影响了这些特性。酪蛋白胶束是动态结构,受其环境变化的影响。从冷压处理牛奶中存在的小的不规则形状的胶束碎片簇到将牛奶加热到43摄氏度时形成的圆形、分离且紧密的胶束的转变清楚地证明了这一点。这种转变的影响表现为颜色指标的显著变化。在酸奶凝胶形成过程中,压力处理和热处理样品中胶束结构的进一步变化导致颜色值趋同。然而,凝胶的微观结构及其流变学性质非常不同。压力处理的牛奶酸奶具有高得多的储能模量,但比加热处理的牛奶酸奶更容易发生大变形。根据最近发表的胶束模型讨论了加工和酸奶制备过程中胶束结构的这些变化。