Cohen Y
Department of Soil Sciences, Swedish University of Agricultural Sciences, Uppsala, Sweden.
Bioresour Technol. 2001 May;77(3):257-74. doi: 10.1016/s0960-8524(00)00074-2.
Biofiltration is distinguished from other biological waste treatments by the fact that there is a separation between the microorganisms and the treated waste. In biofiltration systems the microorganisms are immobilized to the bedding material, while the treated fluid flows through it. In recent decades, a vast amount of literature has been written on single experiments involving the treatment of fluids by immobilized microorganisms. Several artificial immobilization methods have been examined and impressive results have been achieved in the treatment of fluids with one of the artificial immobilization methods the entrapment of microorganisms within polymer beads. This method, even though it needs to be improved, seems to have a future potential in commercial biofiltration systems. The methods of artificial immobilization of microorganisms within biofiltration systems have several advantages, but also suffer from several disadvantages in comparison to the treatment of fluids by naturally attached microorganisms. Understanding the mechanisms and forces responsible for the attachment of microbes to the bedding material, in attempt to improve this attachment, is of the utmost importance. Further improvement of the artificial entrapment of microorganisms within polymers will allow the exploitation of the advantages of this method in the treatment of fluids. The aim of this review essay is to introduce the main principles of two immobilization processes - the self-attachment of microorganisms to the bedding material and the artificial entrapment of microorganisms within polymer beads. Both treatments of liquids and gases with each immobilization process are discussed. The advantages and disadvantages of each immobilization process are pointed out and different aspects of the fluid treatment with the two immobilization processes are compared.
生物过滤与其他生物废物处理方法的区别在于,微生物与被处理的废物之间存在分离。在生物过滤系统中,微生物固定在垫层材料上,而被处理的流体则流经该材料。近几十年来,已经有大量关于使用固定化微生物处理流体的单一实验的文献。人们研究了几种人工固定化方法,并且在使用其中一种人工固定化方法(即微生物包埋在聚合物珠粒中)处理流体方面取得了令人瞩目的成果。这种方法尽管需要改进,但似乎在商业生物过滤系统中具有未来潜力。与通过自然附着的微生物处理流体相比,生物过滤系统中微生物的人工固定化方法有几个优点,但也存在一些缺点。了解负责微生物附着在垫层材料上的机制和力量,以试图改善这种附着,至关重要。进一步改进微生物在聚合物中的人工包埋将使得该方法在流体处理中的优势得以利用。这篇综述文章的目的是介绍两种固定化过程的主要原理——微生物自我附着在垫层材料上以及微生物人工包埋在聚合物珠粒中。文中讨论了每种固定化过程对液体和气体的处理情况。指出了每种固定化过程的优缺点,并比较了两种固定化过程在流体处理方面的不同方面。