Accelerated color change in a maxillofacial elastomer with and without pigmentation.

STATEMENT OF PROBLEM

Maxillofacial prostheses require frequent replacement because the elastomer and its color additives undergo changes.

PURPOSE

This study attempted to determine whether predictable color changes occur when 3 pigments are individually incorporated into a specific silicone elastomer.

MATERIAL AND METHODS

The materials included an RTV elastomer; 1 natural inorganic pigment, burnt sienna; and 2 synthetic organic pigments, Hansa yellow and alizarin red. Eight test groups of 10 polymerized specimens were established. Groups 1 and 2, acting as the control, involved only the elastomer. Groups 3 and 4 were composed of elastomer and burnt sienna. Groups 5 and 6 consisted of elastomer and Hansa yellow. Groups 7 and 8 comprised elastomer and alizarin red. Odd-numbered groups were assigned to a test site in Miami, Fla., whereas the even numbered groups went to Phoenix, Ariz. Specimens weathered in Miami and Phoenix received sunlight exposures of 1305.7 MJ/m2 and 1310.2 MJ/m2, respectively, over time. Before and after weathering, the L* a* b* color parameter (DeltaE*) of each specimen was determined spectrophotometrically.

RESULTS

Mean color changes that occurred in Arizona were larger than those produced in Florida. Specifically, these differences ranged from 0.4 (alizarin red groups) to 2.36 units for the 2 unpigmented control groups. Other differences showed significance for the unpigmented (P=.001), burnt sienna (P=.006), and Hansa yellow groups (P=.001).

CONCLUSION

Outdoor weathering tests in which documented ASTM methods were used provided a valid baseline for future research on color changes in maxillofacial prostheses.