Removal of dissolved brown algal phlorotannins using insoluble polyvinylpolypyrrolidone (PVPP).

Tannins, a large and diverse group of phenolic secondary metabolites, are common in terrestrial plants and marine brown algae. It is sometimes desirable to remove the tannins from plant or algal extracts, e.g., when isolating enzymes and nucleic acids, when using certain colorimetric methods to quantify the tannin content, or to create reliable controls when using tannins in experimental studies. Insoluble polyvinylpolypyrrolidone (PVPP) can be used to specifically remove tannins from solution. In the present study, we evaluated the effect of different factors (amount of PVPP, number of PVPP treatments, type of solvent, pH, and incubation time) on the PVPP removal of dissolved brown algal phlorotannins. Our results imply that there is a limited amount of phlorotannins that can bind to a given amount of PVPP, and that it is preferable to use low quantities of PVPP repeatedly, compared to using fewer treatments with a high amount of PVPP. Furthermore, we found no consistent effect on the removal of phlorotannins due to solvent type (acetone, methanol, distilled water or filtered seawater). There was a slight decrease in the amount of phlorotannins removed from extracts with increasing pH when repeatedly treated with PVPP. All phlorotannins were removed from extracts with pH < or = 6.2, and 89% of the initial phlorotannin content was removed at pH 9.7. These results are compared with previous methodological studies on tannin removal with PVPP. Furthermore, the implications of phlorotannin removal in analytical and ecological investigations are discussed.