Butz F, Lennon A M, Heydecke G, Strub J R
Department of Prosthodontics, School of Dentistry, Albert Ludwigs University, Freiburg, Germany.
Int J Prosthodont. 2001 Jan-Feb;14(1):58-64.
This study compares the survival rate and fracture strength of endodontically treated maxillary incisors with moderate coronal defects restored with different post-and-core systems after exposure to an artificial mouth.
Sixty-four caries-free human maxillary central incisors were selected for standardized size and quality, endodontically treated, and decoronated 2 mm coronal to the cementoenamel junction. Group 1 was restored with titanium posts and composite cores, group 2 received zirconia posts and a composite core, and in group 3 zirconia posts with a heat-pressed ceramic core were used. Teeth restored with cast posts and cores served as controls. All teeth were prepared and restored with complete cast crowns. All samples were exposed to 1.2 million cycles in a computer-controlled chewing simulator with simultaneous thermocycling. In addition, the samples were loaded until fracture in a static testing device.
The survival rates of the different groups were: 94% for titanium/composite, 63% for zirconia/composite, 100% for the all-ceramic post and core, and 94% for the cast post and core. The following mean fracture strengths were obtained: titanium/composite = 425 +/- 155 N, zirconia/composite = 202 +/- 212 N, zirconia/ceramic = 378 +/- 64 N, cast post and core = 426 +/- 178 N. The lower fracture load in the group with zirconia posts and composite cores was statistically significant. The use of zirconia posts resulted in fewer oblique root fractures.
Prefabricated titanium posts with composite cores, zirconia posts with heat-pressed ceramic cores, and cast posts and cores yield comparable survival rates and fracture strengths for the restoration of crowned maxillary incisors with moderate coronal defects. Survival rates and fracture strengths for zirconia posts with composite cores are significantly lower, so this combination cannot be recommended for clinical use.
本研究比较了在人工口腔环境下,采用不同桩核系统修复的中度冠部缺损的根管治疗上颌切牙的存活率和抗折强度。
选取64颗无龋的人类上颌中切牙,根据标准化的尺寸和质量进行根管治疗,并在牙骨质牙釉质界上方2mm处截冠。第1组用钛桩和复合树脂核修复,第2组采用氧化锆桩和复合树脂核,第3组使用氧化锆桩和热压铸陶瓷核。用铸造桩核修复的牙齿作为对照。所有牙齿均制备并全冠修复。所有样本在计算机控制的咀嚼模拟器中进行120万次循环加载,并同时进行热循环。此外,在静态测试装置中对样本加载直至折断。
不同组的存活率分别为:钛桩/复合树脂核组94%,氧化锆桩/复合树脂核组63%,全瓷桩核组100%,铸造桩核组94%。获得的平均抗折强度如下:钛桩/复合树脂核=425±155N,氧化锆桩/复合树脂核=202±212N,氧化锆桩/陶瓷核=378±64N,铸造桩核=426±178N。氧化锆桩和复合树脂核组的较低抗折载荷具有统计学意义。使用氧化锆桩导致斜行根折较少。
对于修复中度冠部缺损的带冠上颌切牙,预制钛桩和复合树脂核、氧化锆桩和热压铸陶瓷核以及铸造桩核的存活率和抗折强度相当。氧化锆桩和复合树脂核的存活率和抗折强度显著较低,因此不推荐这种组合用于临床。