Suppr超能文献

采用锥形矩形钛柄和螺纹髋臼杯的非骨水泥型全髋关节置换术:至少十年随访

Cementless total hip arthroplasty with a tapered, rectangular titanium stem and a threaded cup: a minimum ten-year follow-up.

作者信息

Grübl Alexander, Chiari Catharina, Gruber Martin, Kaider Alexandra, Gottsauner-Wolf Florian

机构信息

Department of Orthopaedic Surgery, University of Vienna, Vienna, Austria.

出版信息

J Bone Joint Surg Am. 2002 Mar;84(3):425-31. doi: 10.2106/00004623-200203000-00014.

Abstract

BACKGROUND

We report the results of cementless total hip arthroplasty with a tapered, rectangular titanium stem that was introduced in 1979 and continues to be used today with only minor changes. The aim of the design is to achieve primary stability to resist rotational and axial forces through precision rasping and press-fit implantation of a tapered, rectangular femoral component.

METHODS

Between October 1986 and November 1987, 208 total hip arthroplasties with insertion of a tapered, rectangular titanium stem and a threaded cup without cement were performed in 200 consecutive patients (average age, sixty-one years; range, twenty-two to eighty-four years).

RESULTS

At the time of the latest follow-up, fifty-one patients (fifty-two hips) had died and sixteen patients had been lost to follow-up, leaving 133 patients. Twelve hips had been revised, two in patients who subsequently died, leaving 123 living patients without revision. The median follow-up time was 120.7 months. Five cups needed revision surgery because of aseptic loosening; two, because of massive polyethylene wear; one, because of posttraumatic migration; and one, because of breakage. Three femoral stems were revised: one because of malpositioning (the reoperation was done five days after implantation); one, because of infection; and the third, after multiple failed acetabular revisions. The mean Harris hip score for the patients who did not have revision was 85.4 points (range, 46 to 100 points) at the time of the latest follow-up. Four patients (3%) complained of thigh pain that was not associated with another disorder. According to the criteria of Engh et al., all femoral implants were graded as stable bone-ingrown. The probability of survival of both the femoral and the acetabular component at ten years, with any revision as the end point, was 0.92 (95% confidence interval, 0.88 to 0.97). The probability of survival of the cup was 0.93 (95% confidence interval, 0.89 to 0.97), and that of the stem was 0.99 (95% confidence interval, 0.97 to 1.00).

CONCLUSIONS

The results of arthroplasty with a tapered, rectangular titanium stem combined with a conical threaded cup inserted without cement were excellent at a minimum of ten years. Our data suggest that femoral stem fixation continues to be secure, while the threaded cup is prone to aseptic loosening.

摘要

背景

我们报告了1979年引入的一种锥形矩形钛柄非骨水泥型全髋关节置换术的结果,该术式至今仍在使用,仅有细微变化。其设计目的是通过对锥形矩形股骨部件进行精确锉削和压配植入来实现初始稳定性,以抵抗旋转和轴向力。

方法

1986年10月至1987年11月,连续200例患者(平均年龄61岁;范围22至84岁)接受了208例非骨水泥型全髋关节置换术,植入锥形矩形钛柄和带螺纹髋臼杯。

结果

在最近一次随访时,51例患者(52髋)已死亡,16例患者失访,剩余133例患者。12髋进行了翻修,其中2例患者随后死亡,剩余123例存活患者未翻修。中位随访时间为120.7个月。5个髋臼杯因无菌性松动需要翻修手术;2个因大量聚乙烯磨损;1个因创伤后移位;1个因破裂。3个股骨柄进行了翻修:1个因位置不当(再次手术在植入后5天进行);1个因感染;第3个在多次髋臼翻修失败后进行。在最近一次随访时,未进行翻修的患者的平均Harris髋关节评分为85.4分(范围46至满分100分)。4例患者(3%)主诉大腿疼痛,但与其他疾病无关。根据Engh等人的标准,所有股骨植入物均被评为骨长入稳定。以任何翻修为终点,股骨和髋臼部件在10年时的生存率为0.92(95%置信区间,0.88至0.97)。髋臼杯的生存率为0.93(95%置信区间,0.89至0.97),股骨柄的生存率为0.99(95%置信区间,0.97至1.00)。

结论

锥形矩形钛柄联合非骨水泥型锥形带螺纹髋臼杯的关节置换术至少10年的结果优异。我们的数据表明,股骨柄固定仍然牢固,而带螺纹髋臼杯易于发生无菌性松动。

文献AI研究员

20分钟写一篇综述,助力文献阅读效率提升50倍。

立即体验

用中文搜PubMed

大模型驱动的PubMed中文搜索引擎

马上搜索

文档翻译

学术文献翻译模型,支持多种主流文档格式。

立即体验