Genth Uwe, Mrochen Michael, Wälti Rudolf, Salaheldine Mustafa M, Seiler Theo
The Department of Ophthalmology, University of Dresden, Dresden, Germany.
Ophthalmology. 2002 May;109(5):973-8. doi: 10.1016/s0161-6420(02)01016-3.
There is growing evidence that iatrogenic keratectasia after laser in situ keratomileusis (LASIK) for high corrections occurs more frequently than initially assumed, and that it may result from larger variation in flap thickness.
Consecutive noncomparative case series
Thirty-four patients who underwent LASIK for myopia and astigmatism (first treatment group) and 10 patients who received re-LASIK (retreatment group).
Central corneal thickness and thickness of the lamella during LASIK were determined by optical low coherence reflectometry (OLCR) and contact ultrasound pachymetry.
Thickness of the flap and its standard deviation, as well as its correlation with age, sphere, cylinder, corneal thickness, intraocular pressure, and corneal refractive power (K-readings).
The mean flap thickness of the first treatment group determined by OLCR was 130 +/- 29 microm; the 95 percentile was 169 microm and the 5 percentile was 86 microm. The flap thickness was not correlated with any of the investigated demographic or refractive parameters. The mean flap thickness of the retreatment group was 152 +/- 14 microm; the 95 percentile was 175 microm and the 5 percentile was 137 microm. Thus, the flap thickness of the retreatment group was significantly thicker compared with the first treatment group (P < 0.001).
Optical low coherence reflectometry (OLCR) was shown to be an appropriate alternative to ultrasonic preoperative and intraoperative corneal pachymetry in laser assisted in situ keratomileusis. The lack of correlation between achieved flap thickness and preoperative clinical data, such as corneal thickness, corneal curvature, intraocular pressure, and refraction, emphasizes the importance of measuring flap thickness and corneal bed thickness during surgery.
越来越多的证据表明,准分子原位角膜磨镶术(LASIK)用于高度近视矫正后发生医源性角膜扩张的频率比最初设想的更高,且这可能是由于瓣厚度的较大差异所致。
连续非对照病例系列
34例行LASIK治疗近视和散光的患者(首次治疗组)以及10例行再次LASIK的患者(再次治疗组)。
在LASIK手术期间,通过光学低相干反射测量法(OLCR)和接触式超声测厚法确定中央角膜厚度和板层厚度。
瓣的厚度及其标准差,以及其与年龄、球镜度数、柱镜度数、角膜厚度、眼压和角膜屈光力(K值读数)的相关性。
通过OLCR确定的首次治疗组瓣的平均厚度为130±29微米;第95百分位数为169微米,第5百分位数为86微米。瓣厚度与任何所研究的人口统计学或屈光参数均无相关性。再次治疗组瓣的平均厚度为152±14微米;第95百分位数为175微米,第5百分位数为137微米。因此,再次治疗组的瓣厚度明显厚于首次治疗组(P<0.001)。
在准分子原位角膜磨镶术中,光学低相干反射测量法(OLCR)被证明是术前和术中超声角膜测厚的合适替代方法。所获得的瓣厚度与术前临床数据(如角膜厚度、角膜曲率、眼压和屈光度)之间缺乏相关性,强调了手术中测量瓣厚度和角膜床厚度的重要性。