Suppr超能文献

跳跃或运动回合之间的间隔对负荷成骨反应的影响。

Effects of intervals between jumps or bouts on osteogenic response to loading.

作者信息

Umemura Yoshihisa, Sogo Naota, Honda Akiko

机构信息

Laboratory for Exercise Physiology and Biomechanics, School of Health and Sport Sciences, Chukyo University, Toyota 470-0393, Japan.

出版信息

J Appl Physiol (1985). 2002 Oct;93(4):1345-8. doi: 10.1152/japplphysiol.00358.2002.

Abstract

Prolonged loading repetitions can diminish the mechanosensitivity of bones, and increased intervals between loading might restore sensitivity. This study was designed to investigate the effects of intervals between loadings or bouts on osteogenic response. Forty female Fisher 344 rats aged 5 wk were divided into a control group and three exercise groups: 20 jumps in a single bout with a 3-s (S3) or 30-s (S30) jump interval, or 20 jumps in 2 bouts (10 x 2) separated by a 6-h interval with a 3-s jump interval (D3). After 8 wk of training, the bone masses per body weight of the femur and tibia were significantly greater in the three exercise groups than in the control group, and these values were also greater in S30 than in S3, although they were at the same level in D3 and S3. These data suggest that a longer interval (30 s) between individual loading had more effective anabolic effects on bone than a shorter interval (3 s).

摘要

长时间的负荷重复会降低骨骼的机械敏感性,而增加负荷之间的间隔时间可能会恢复敏感性。本研究旨在调查负荷或运动回合之间的间隔时间对成骨反应的影响。将40只5周龄的雌性Fisher 344大鼠分为对照组和三个运动组:单次运动回合进行20次跳跃,跳跃间隔为3秒(S3)或30秒(S30),或者分2个运动回合(10×2)进行20次跳跃,回合间隔为6小时,跳跃间隔为3秒(D3)。训练8周后,三个运动组股骨和胫骨的单位体重骨量均显著高于对照组,且S30组的值高于S3组,尽管D3组和S3组处于同一水平。这些数据表明,单次负荷之间较长的间隔时间(30秒)比短间隔时间(3秒)对骨骼具有更有效的合成代谢作用。

文献AI研究员

20分钟写一篇综述,助力文献阅读效率提升50倍。

立即体验

用中文搜PubMed

大模型驱动的PubMed中文搜索引擎

马上搜索

文档翻译

学术文献翻译模型,支持多种主流文档格式。

立即体验