Alberton Gregory M, High Whitney A, Morrey Bernard F
Mayo Clinic and Mayo Foundation, Rochester, Minnesota 55905, USA.
J Bone Joint Surg Am. 2002 Oct;84(10):1788-92.
Dislocation is a leading and underemphasized cause of failure in revision total hip arthroplasty. Although this fact is generally well recognized, we are aware of no detailed assessments of this problem to date. Our purpose therefore was to evaluate the risk factors leading to instability after revision as well as the expected outcome of various treatment strategies.
Data were obtained from 1548 revision arthroplasties in 1405 patients who were followed for a minimum of two years (range, 2.0 to 16.4 years; mean, 8.1 years) or until dislocation occurred. Revisions specifically performed because of instability were excluded from the analysis. Risk factors were recorded along with treatment strategies and their success. The statistical relevance of both sets of variables was calculated.
A dislocation occurred after 115 (7.4%) of 1548 revision hip arthroplasties. The use of an elevated rim liner was associated with significant decreases (p < 0.05) in dislocation following revision of femoral and acetabular components. The presence of trochanteric nonunion was a significant risk factor for subsequent dislocation (p < 0.001). Revisions with 32-mm and 28-mm-diameter femoral heads were both more stable than was revision with a 22-mm-diameter head (p < 0.05 for each). Surgery was the initial treatment for twelve of the 115 dislocations. Six of the twelve hips had no further instability. Of the 103 postoperative dislocations initially managed nonoperatively, only thirty-six did not redislocate. Thirty-eight of the sixty-seven hips that had an additional dislocation after closed treatment had repeat surgery for treatment of the instability. Only eleven of the thirty-eight hips were stable at one year after surgery. Overall, at the time of the final assessment, sixty-five (57%) of the 115 hips were stable, forty-one (36%) remained unstable, and the status of nine (8%) was unknown.
The risk factors for instability after a total hip revision are not the same as those after a primary procedure. The extent of the soft-tissue dissection is probably the most important variable since head size and trochanteric nonunion are related to "soft-tissue tension." Modular acetabular components with an elevated rim help to stabilize a hip undergoing a revision procedure.
脱位是翻修全髋关节置换术失败的主要原因,但未得到足够重视。尽管这一事实已得到普遍认可,但目前尚无对此问题的详细评估。因此,我们的目的是评估翻修术后导致不稳定的危险因素以及各种治疗策略的预期结果。
数据来自1405例患者的1548例翻修关节成形术,这些患者至少随访两年(范围为2.0至16.4年;平均8.1年)或直至发生脱位。因不稳定而专门进行的翻修被排除在分析之外。记录危险因素以及治疗策略及其成功率。计算两组变量的统计学相关性。
1548例翻修髋关节置换术中,115例(7.4%)发生脱位。在股骨和髋臼组件翻修后,使用高边衬垫与脱位显著减少相关(p<0.05)。转子不愈合是随后脱位的重要危险因素(p<0.001)。直径32毫米和28毫米的股骨头翻修比直径22毫米的股骨头翻修更稳定(两者p<0.05)。手术是115例脱位中12例的初始治疗方法。12例髋关节中有6例未再出现不稳定。在最初非手术治疗的103例术后脱位中,只有36例未再次脱位。67例在闭合治疗后再次脱位的髋关节中,38例因不稳定而再次手术治疗。38例髋关节中只有11例在术后一年稳定。总体而言,在最终评估时,115例髋关节中有65例(57%)稳定,41例(36%)仍不稳定,9例(8%)情况不明。
全髋关节翻修术后不稳定的危险因素与初次手术不同。软组织剥离程度可能是最重要的变量,因为股骨头大小和转子不愈合与“软组织张力”有关。带高边的模块化髋臼组件有助于稳定正在进行翻修手术的髋关节。