Suppr超能文献

与剪切诱导变形和脱离现象相关的生物膜材料特性。

Biofilm material properties as related to shear-induced deformation and detachment phenomena.

作者信息

Stoodley P, Cargo R, Rupp C J, Wilson S, Klapper I

机构信息

Center for Biofilm Engineering, Montana State University, Bozeman 59717, USA.

出版信息

J Ind Microbiol Biotechnol. 2002 Dec;29(6):361-7. doi: 10.1038/sj.jim.7000282.

Abstract

Biofilms of various Pseudomonas aeruginosa strains were grown in glass flow cells under laminar and turbulent flows. By relating the physical deformation of biofilms to variations in fluid shear, we found that the biofilms were viscoelastic fluids which behaved like elastic solids over periods of a few seconds but like linear viscous fluids over longer times. These data can be explained using concepts of associated polymeric systems, suggesting that the extracellular polymeric slime matrix determines the cohesive strength. Biofilms grown under high shear tended to form filamentous streamers while those grown under low shear formed an isotropic pattern of mound-shaped microcolonies. In some cases, sustained creep and necking in response to elevated shear resulted in a time-dependent fracture failure of the "tail" of the streamer from the attached upstream "head." In addition to structural differences, our data suggest that biofilms grown under higher shear were more strongly attached and were cohesively stronger than those grown under lower shears.

摘要

在层流和湍流条件下,将各种铜绿假单胞菌菌株的生物膜置于玻璃流动池中培养。通过将生物膜的物理变形与流体剪切力的变化相关联,我们发现生物膜是粘弹性流体,在几秒钟的时间内表现得像弹性固体,但在更长时间内表现得像线性粘性流体。这些数据可以用相关聚合物体系的概念来解释,这表明细胞外聚合物粘液基质决定了内聚强度。在高剪切力下生长的生物膜倾向于形成丝状飘带,而在低剪切力下生长的生物膜则形成丘状微菌落的各向同性模式。在某些情况下,响应于升高的剪切力而持续的蠕变和颈缩导致飘带的“尾部”相对于附着的上游“头部”发生随时间变化的断裂失效。除了结构差异外,我们的数据表明,在较高剪切力下生长的生物膜比在较低剪切力下生长的生物膜附着更强,内聚性也更强。

文献AI研究员

20分钟写一篇综述,助力文献阅读效率提升50倍。

立即体验

用中文搜PubMed

大模型驱动的PubMed中文搜索引擎

马上搜索

文档翻译

学术文献翻译模型,支持多种主流文档格式。

立即体验