Kristensen Michael S
Department of Anaesthesia, Center of Head and Orthopaedics, Copenhagen University Hospital, Rigshospitalet, Denmark.
Anesthesiology. 2003 Feb;98(2):354-8. doi: 10.1097/00000542-200302000-00014.
During fiberoptic tracheal intubation, passage of the fiberscope itself to the trachea is often fairly easy, but passage of the tube into the trachea may be difficult or even impossible. A new type of disposable endotracheal tube, the Parker Flex-Tip tube, has a tip that reduces the gap between the fiberscope and the inside of the tube. Thus, theoretically, a smaller risk of impinging on laryngeal structures during insertion in trachea is expected.
Eighty patients scheduled for elective anesthesia using orotracheal intubation were randomized to either a Parker Flex-Tip tube or a standard (Portex) 7.5-mm-ID endotracheal tube. Blinding was obtained by having the tube premounted on the fiberscope (Olympus LF-1; diameter of fiberscope = 4 mm) and thereafter covered with a black opaque plastic bag. Difficulty in placing the tube was scored using an objective standardized grading system.
Seventy-six patients completed the study. The use of the Parker Flex-Tip tube reduced the incidence of need for repositioning of the tube during insertion into trachea from 89% to 29% (P < 0.0001) when compared to the standard tube. The median time for passage of the tube into the trachea was reduced from 20 s to 7.5 s (P < 0.0001).
During oral fiberoptic intubation, the use of the Parker Flex-Tip tube is associated with greater incidence of initial success of passage of the tube into trachea when compared to a standard endotracheal tube.
在纤维支气管镜引导下气管插管过程中,纤维支气管镜本身进入气管通常相当容易,但气管导管进入气管可能困难甚至无法完成。一种新型一次性气管导管——帕克可弯曲头端导管,其头端可缩小纤维支气管镜与导管内部之间的间隙。因此,从理论上讲,预计在气管内插入过程中撞击喉部结构的风险较小。
80例计划行择期经口气管插管麻醉的患者被随机分为两组,分别使用帕克可弯曲头端导管或标准的(波特克斯)内径7.5mm气管导管。通过将导管预先安装在纤维支气管镜(奥林巴斯LF-1;纤维支气管镜直径=4mm)上,然后用黑色不透明塑料袋覆盖来实现盲法。使用客观标准化评分系统对导管放置难度进行评分。
76例患者完成了研究。与标准导管相比,使用帕克可弯曲头端导管使气管内插入过程中导管重新定位的需求发生率从89%降至29%(P<0.0001)。导管进入气管的中位时间从20秒缩短至7.5秒(P<0.0001)。
在经口纤维支气管镜插管过程中,与标准气管导管相比,使用帕克可弯曲头端导管使导管进入气管的初始成功率更高。