Lee Do-Hyung, Seo Sejung, Jeong Kui Won, Shin Soo-Cheol, Vukich John A
Department of Ophthalmology, Ilsan Paik Hospsital, Inje University Medical College, South Korea.
J Cataract Refract Surg. 2003 Apr;29(4):778-84. doi: 10.1016/s0886-3350(02)01842-4.
To evaluate the forward shift of the posterior corneal surface after myopic laser in situ keratomileusis (LASIK) relative to the residual stromal bed thickness and the ablation percentage of the total corneal thickness.
Department of Ophthalmology, Ilsan Paik Hospital, Inje University, Ilsan, Korea.
Three hundred sixty-three eyes of 182 consecutive patients who had LASIK were examined retrospectively. The range of the refractive errors was -1.5 to -12.0 diopters. Corneal topography using Orbscan II (Bausch & Lomb) and pachymetry were obtained preoperatively and 1 week and 1, 2, and 3 months postoperatively. The patients were divided into 4 groups based on the residual stromal bed thickness: Group 1, 145 eyes with less than 250 microm; Group 2, 129 eyes with 250 to 300 microm; Group 3, 76 eyes with 300 to 350 microm; and Group 4, 13 eyes with more than 350 microm. They were also grouped by the ablation percentage per total corneal thickness: Group A, 16 eyes with less than 10%; Group B, 166 eyes with 10% to 20%; Group C, 146 eyes with 20% to 30%; and Group D, 35 eyes with more than 30%.
The increase in the forward shift of the posterior corneal surface postoperatively correlated with the residual corneal bed thickness and the ablation ratio per total corneal thickness. There were no statistically significant changes in the postsurgical forward shift of the posterior corneal surface if the residual corneal thickness remained greater than 350 microm or the ablation percentage was less than 10%.
Increased forward shift of the posterior corneal surface is common after myopic LASIK and correlates with the residual corneal thickness and the ablation percentage per total corneal thickness. An excessively thin residual corneal bed or a large ablation percentage may increase the risk of iatrogenic complications.
评估近视激光原位角膜磨镶术(LASIK)后角膜后表面相对于剩余基质床厚度和总角膜厚度消融百分比的前移情况。
韩国一山峨山白医院仁济大学眼科。
回顾性检查182例连续接受LASIK手术患者的363只眼。屈光不正范围为-1.5至-12.0屈光度。术前以及术后1周、1个月、2个月和3个月使用Orbscan II(博士伦)进行角膜地形图检查并测量角膜厚度。根据剩余基质床厚度将患者分为4组:第1组,145只眼,剩余基质床厚度小于250微米;第2组,129只眼,剩余基质床厚度为250至300微米;第3组,76只眼,剩余基质床厚度为300至350微米;第4组,13只眼,剩余基质床厚度大于350微米。还根据总角膜厚度的消融百分比进行分组:A组,16只眼,消融百分比小于10%;B组,166只眼,消融百分比为10%至20%;C组,146只眼,消融百分比为20%至30%;D组,35只眼,消融百分比大于30%。
术后角膜后表面前移增加与剩余角膜床厚度和总角膜厚度的消融比例相关。如果剩余角膜厚度大于350微米或消融百分比小于10%,角膜后表面术后的前移没有统计学上的显著变化。
近视LASIK术后角膜后表面前移增加很常见,且与剩余角膜厚度和总角膜厚度的消融百分比相关。剩余角膜床过薄或消融百分比过大可能会增加医源性并发症的风险。