Mari M, Bertolini P, Pratella G C
CRIOF, University of Bologna, V. Gandolfi, Cadriano, Bologna, Italy.
J Appl Microbiol. 2003;94(5):761-6. doi: 10.1046/j.1365-2672.2003.01920.x.
Pears are highly perishable products, especially during the post-harvest phase, when considerable losses can occur. Among the fungal diseases, blue mold caused by Penicillium expansum, grey mould caused by Botrytis cinerea, Mucor rot caused by Mucor piriformis are common on pear fruits. Other (weak) pathogens like Phialophora malorum, Alternaria spp., and Cladosporium herbarum tend to infect wounds and senescent fruits. A post-harvest fungicide treatment can reduce decay but effectiveness decreases with the appearance of resistant strains. There is a clear need to develop new and alternative methods of controlling post-harvest diseases. The emerging technologies for the control of post-harvest fungal diseases are essentially threefold: application of antagonistic microorganisms, application of natural antimicrobial substances and application of sanitizing products. Two biological control products, Aspire (Candida oleophila I-182) (Ecogen, Langhorne, PA, USA) and Bio-Save 110 (Pseudomonas syringae) (EcoScience, Worcester, MA, USA; formerly Bio-Save 11) are currently registered in the USA for post-harvest application to pears. Other potential biocontrol agents have been isolated from fruit and shown to suppress post-harvest decay in pear. It is important that evaluation of these microorganisms be carried out in a product formulation because the formulation may improve or diminish antagonistic efficacy depending on the concentration of chemical product and the duration of exposure to the treatment. Plants produce a large number of secondary metabolites with antimicrobial effects on post-harvest pathogens. Detailed studies have been conducted on aromatic compounds, essential oils, volatile substances and isothiocyanates, with encouraging results. In particular, allyl-isothiocyanate used as a volatile substance, controls blue mould in 'Conference' and 'Kaiser' pear inoculated with a thiabendazole-resistant strain. Sanitizing products such as chlorine dioxide, peracetic acid and ozone have considerable fungicidal activity against P. expansum and M. piriformis, depending on the concentration of chemical product and the duration of exposure to the treatment. Sanitizing solutions can be integrated easily with current handling and storage practices; however, further research is required to define the effective procedures better.
梨是极易腐烂的产品,尤其是在采后阶段,此时可能会出现相当大的损失。在真菌病害中,由扩展青霉引起的青霉病、由灰葡萄孢引起的灰霉病、由梨形毛霉引起的毛霉腐烂病在梨果实上很常见。其他(较弱的)病原菌如苹果茎点霉、链格孢属和草本枝孢往往会感染伤口和衰老果实。采后杀菌剂处理可以减少腐烂,但随着抗性菌株的出现,其效果会降低。显然需要开发新的和替代的方法来控制采后病害。控制采后真菌病害的新兴技术主要有三种:应用拮抗微生物、应用天然抗菌物质和应用消毒产品。两种生物防治产品,即Aspire(嗜油假丝酵母I-182)(美国宾夕法尼亚州兰霍恩市的Ecogen公司)和Bio-Save 110(丁香假单胞菌)(美国马萨诸塞州伍斯特市的EcoScience公司;原Bio-Save 11)目前在美国已注册用于梨的采后处理。其他潜在的生物防治剂已从果实中分离出来,并显示出能抑制梨的采后腐烂。重要的是,这些微生物的评估要在产品配方中进行,因为配方可能会根据化学产品的浓度和处理暴露时间提高或降低拮抗效果。植物产生大量对采后病原菌有抗菌作用的次生代谢物。对芳香化合物、精油、挥发性物质和异硫氰酸盐进行了详细研究,结果令人鼓舞。特别是,用作挥发性物质的烯丙基异硫氰酸酯能控制接种了噻苯达唑抗性菌株的“康佛伦斯”和“凯泽”梨的青霉病。二氧化氯、过氧乙酸和臭氧等消毒产品对扩展青霉和梨形毛霉具有相当大的杀菌活性,这取决于化学产品的浓度和处理暴露时间。消毒溶液可以很容易地与当前的处理和储存方法相结合;然而,需要进一步研究以更好地确定有效程序。