Suppr超能文献

猪晶状体上皮细胞在三种不同人工晶状体材料上的体外黏附与活力

Adherence and viability of porcine lens epithelial cells on three different IOL materials in vitro.

作者信息

Hesse Yvonne, Kampmeier Jürgen, Lang Gerhard K, Baldysiak-Figiel Alicia, Lang Gabriele E

机构信息

Department of Ophthalmology, University of Ulm, Prittwitzstr 43, 89075 Ulm, Germany.

出版信息

Graefes Arch Clin Exp Ophthalmol. 2003 Oct;241(10):823-6. doi: 10.1007/s00417-003-0718-5. Epub 2003 Aug 23.

Abstract

BACKGROUND

The purpose of the study was to evaluate porcine lens epithelial cell (LEC) adhesion and viability on three different intraocular lens (IOL) materials.

METHODS

The IOL materials tested were poly(methylmethacrylate) (PMMA), silicone and hydrophobic acrylate. Primary porcine LECs were cultured on four discs of each material over a period of 10 days and, additionally, on six discs of the hydrophobic acrylate over a period of 20 days. Cells grown on untreated wells of a 96-well microtiter plate served as a control. Cell adhesion was photodocumentated on days 1, 2, 3, 4, 6, 8, 10, 14,17 and 20. A cell viability test using the LIVE/DEAD kit (Molecular Probes) was carried out at the end of the investigation. Experiments were run in triplicate. Statistical analysis was performed using the Student's t-test.

RESULTS

Confluent cell growth was reached on the hydrophobic acrylate discs and the control wells within 1 day and remained stable during the experiment. Only a few round cells were adherent on PMMA and silicone discs, and their number decreased during the experiment. After 10 days of culturing, the viability test (mean +/- SD) revealed 81.79 +/- 51.74% live cells on acrylate discs, which was not different from the control (105.83 +/- 21.78%, P=0.1589). Significantly lower relative numbers of live cells (P>0.0001) were found on PMMA (-0.62 +/- 2.24%) and silicone (21.47 +/- 8.42%) discs. The percentage of dead cells was significantly higher (P<0.0001) on hydrophobic acrylate discs (29.69 +/- 12.61%) compared to the control (-1.49 +/- 4.13%). After a culture period of 20 days, the percentage of live cells on hydrophobic acrylate discs (49.45 +/- 27.98%) was lower compared to day 10, but was not significantly different from control wells (58.77 +/- 10.71%) (P=0.2299).

CONCLUSIONS

Significantly fewer cells grew on PMMA and silicone discs compared to the control. Confluent cell growth and numbers of viable cells comparable to the control were observed on hydrophobic acrylate discs after a culture period of 20 days with a significantly higher percentage of dead cells.

摘要

背景

本研究的目的是评估猪晶状体上皮细胞(LEC)在三种不同人工晶状体(IOL)材料上的黏附及存活情况。

方法

所测试的IOL材料为聚甲基丙烯酸甲酯(PMMA)、硅酮和疏水丙烯酸酯。将原代猪LEC在每种材料的四个圆盘上培养10天,此外,在疏水丙烯酸酯的六个圆盘上培养20天。在96孔微量滴定板未处理孔中生长的细胞作为对照。在第1、2、3、4、6、8、10、14、17和20天对细胞黏附情况进行拍照记录。在研究结束时使用LIVE/DEAD试剂盒(Molecular Probes)进行细胞活力测试。实验重复三次。采用学生t检验进行统计分析。

结果

在1天内疏水丙烯酸酯圆盘和对照孔中达到汇合细胞生长,且在实验过程中保持稳定。在PMMA和硅酮圆盘上仅黏附了少数圆形细胞,且其数量在实验过程中减少。培养10天后,活力测试(平均值±标准差)显示丙烯酸酯圆盘上有81.79±51.74%的活细胞,与对照无差异(105.83±21.78%,P=0.1589)。在PMMA(-0.62±2.24%)和硅酮(21.47±8.42%)圆盘上发现活细胞的相对数量显著更低(P>0.0001)。与对照(-1.49±4.13%)相比,疏水丙烯酸酯圆盘上死细胞的百分比显著更高(P<0.0001)(29.69±12.61%)。培养20天后,疏水丙烯酸酯圆盘上活细胞的百分比(49.45±27.98%)低于第10天,但与对照孔(58.77±10.71%)无显著差异(P=0.2299)。

结论

与对照相比,在PMMA和硅酮圆盘上生长的细胞显著更少。在疏水丙烯酸酯圆盘上培养20天后观察到汇合细胞生长且活细胞数量与对照相当,但死细胞百分比显著更高。

文献AI研究员

20分钟写一篇综述,助力文献阅读效率提升50倍。

立即体验

用中文搜PubMed

大模型驱动的PubMed中文搜索引擎

马上搜索

文档翻译

学术文献翻译模型,支持多种主流文档格式。

立即体验