Van der Bruggen Bart, Lejon Liesbeth, Vandecasteele Carlo
Laboratory for Environmental Technology, Department of Chemical Engineering, University of Leuven, W. de Croylaan 46, B-3001 Heverlee, Belgium.
Environ Sci Technol. 2003 Sep 1;37(17):3733-8. doi: 10.1021/es0201754.
Application of pressure-driven membrane processes (microfiltration, ultrafiltration, nanofiltration, and reverse osmosis) results in the generation of a large concentrated waste stream, the concentrate fraction, as a byproduct of the purification process. Treatment of the concentrate is a major hurdle for the implementation of pressure-driven membrane processes since the concentrate is usually unusable and has to be discharged or further treated. This paper reviews possibilities to treat or discharge the concentrate: (i) reuse, (ii) removal of contaminants, (iii) incineration, (iv) direct or indirect discharge in surface water, (v) direct or indirect discharge in groundwater, and (vi) discharge on a landfill. General guidelines are given for the choice of a proper method as a function of the origin and composition of the water treated. Next, the further treatment of the concentrates in four application areas of pressure-driven membrane processes (drinking water industry, leather industry, and membrane treatment of landfill leachates and of textile process waters) is discussed.
压力驱动膜工艺(微滤、超滤、纳滤和反渗透)的应用会产生大量浓缩废物流,即浓缩部分,作为净化过程的副产品。浓缩物的处理是压力驱动膜工艺实施的一个主要障碍,因为浓缩物通常无法使用,必须排放或进一步处理。本文综述了处理或排放浓缩物的可能性:(i)再利用,(ii)去除污染物,(iii)焚烧,(iv)直接或间接排放到地表水,(v)直接或间接排放到地下水,以及(vi)排放到垃圾填埋场。根据所处理水的来源和成分,给出了选择合适方法的一般指导原则。接下来,讨论了压力驱动膜工艺四个应用领域(饮用水行业、皮革行业、垃圾渗滤液和纺织工艺水的膜处理)中浓缩物的进一步处理。