Biel S S, Kawaschinski K, Wittern K-P, Hintze U, Wepf R
Analytical Microscopy, Beiersdorf AG, Unnastrasse 48, D-20245 Hamburg, Germany.
J Microsc. 2003 Oct;212(Pt 1):91-9. doi: 10.1046/j.1365-2818.2003.01227.x.
Structural investigation of tissue biopsies requires the coupling of optimal structural sample preservation with detailed information collected at the light and electron microscopic level. Unfortunately, although cryo-immobilization by high-pressure freezing provides the best structural preservation, it is used routinely only for electron microscopic (EM) investigations, whereas for light microscopy chemical fixation protocols have been established. These chemically invasive fixation protocols have the drawback of introducing unpredictable fixation artefacts. Therefore, comparative histopathological (i.e. light microscopic) and ultrastructural (i.e. EM) results are usually obtained from parallel samples that have not been prepared identically and never by examining exactly the same features in exactly the same, optimally preserved sample. Finally, finding an area of interest for EM investigation within a complex tissue is like searching for a needle in a haystack. To overcome these handicaps, we modified the well-established freeze-substitution technique (FS) to allow us to investigate resin-embedded cryo-immobilized tissue by confocal laser scanning microscopy (CLSM) prior to EM examination. Thus (1) selected cells throughout the whole tissue block can be depicted by CLSM and subsequently (2) selectively prepared by targeted sectioning for follow-up investigation of the identical structure by transmission electron microscopy. This is facilitated by the addition of specific fluorescent dyes during the first FS exchange step. Selective binding properties of various dyes to different cellular structures allow a direct histological description of the tissue at the light microscope level. After embedding and preparation of a blockface, the specimen can first be examined by CLSM. For areas of interest, the depth in the resin block is determined followed by removal of the tissue lying above. Then, the cell layer can be cut into a series of ultrathin sections and examined by EM for determination of the subcellular and nanostructural organization.
组织活检的结构研究需要将最佳的结构样本保存与在光学和电子显微镜水平收集的详细信息相结合。不幸的是,尽管高压冷冻的低温固定能提供最佳的结构保存,但它通常仅用于电子显微镜(EM)研究,而对于光学显微镜,已经建立了化学固定方案。这些具有化学侵入性的固定方案存在引入不可预测的固定假象的缺点。因此,比较组织病理学(即光学显微镜)和超微结构(即EM)结果通常是从未经过相同制备的平行样本中获得的,而且从来不是通过在完全相同、保存最佳的样本中检查完全相同的特征来实现的。最后,在复杂组织中找到用于EM研究的感兴趣区域就像大海捞针。为了克服这些障碍,我们改进了成熟的冷冻置换技术(FS),使我们能够在EM检查之前通过共聚焦激光扫描显微镜(CLSM)研究树脂包埋的低温固定组织。因此,(1)整个组织块中的选定细胞可以通过CLSM描绘出来,随后(2)通过靶向切片进行选择性制备,以便通过透射电子显微镜对相同结构进行后续研究。在第一个FS交换步骤中添加特定的荧光染料有助于实现这一点。各种染料与不同细胞结构的选择性结合特性允许在光学显微镜水平对组织进行直接的组织学描述。在包埋并制备一个块面后,标本首先可以通过CLSM进行检查。对于感兴趣的区域,确定树脂块中的深度,然后去除上面的组织。然后,可以将细胞层切成一系列超薄切片,并通过EM检查以确定亚细胞和纳米结构组织。